If you’re looking to Sell Agilent Wirescope PRO N2647SM SM Fiber SmartPobes
Dual-wavelength Fiber SmartProbes allow the WireScope™ Pro to measure length and propagation delay on optical fiber links. Also, they enable high-performance optical loss and power measurement.
If you’re looking to Sell Agilent Wirescope PRO N2647MM MM Fiber SmartPobes
Agilent Wirescope PRO N2647MM Multimode 850 nm / 1300 nm Fiber SmartProbes
Dual-wavelength Fiber SmartProbes allow the WireScope™ Pro to measure length and propagation delay on optical fiber links. Also, they enable high-performance optical loss and power measurement.
Buying, Selling, Trading Agilent Wirescope PRO N2647MM
Product Specifications:
Parameter Description
*Size: 79.5mm x 64mm x 44mm (3.1″ x 2.5″ x 1.7″)
*Connectors: 2 x SC (Transmitter, Receiver)
*Operating Temperature: 0°C to +40°C
*Storage Temperature: -40°C to +55°C
Power Meter
* Detector Type: InGaAs
* Calibrated Wavelengths: 850 nm, 1300 nm
* Measurement Accuracy: +/- 0.25 dB at –20 dBm [1][2]
* Power Measurement Range: 0 to –42 dBm
Transmitter
* Source Type: LED
* Center Wavelength: 850 nm, 1300 nm (nominal)
* Output Power: > –20.5 dBm (into 50/125 ?m fiber)
* Laser Stability: > –19 dBm (typical, into 62.5/125 ?m fiber)
Fiber Network Specifications
* Cabling Standards ANSI/EIA/TIA 568A, 568.3, ISO/IEC 11801
* Ethernet 10GBASE-SR, -SW, -LX4
* Legacy Networks 1000BASE-SX, -LX, -LX10
* ATM/SONET 100BASE-FX
* FDDI/Fiber Channel 10BASE-FL, -FB, Token Ring
ATM-155 (UNI 3.1), ATM-155 SWL,
ATM-622, ATM/SONET OC-3, -OC-12
FDDI, Fiber Channel-SX, -LX
Propagation Delay
* Accuracy (whichever is greater): +/-2% or +/-3.6 ns
* Resolution: 4.2 ns
* Measurement Range: 0 to 300 ?s
Fiber Length
* Accuracy (whichever is greater): +/-2% or +/-0.72 m
* Resolution: 0.83 m at Refractive Index 1.4785
* Distance Range: 0 to 8 km for 1.50 dB/km at 1300 nm [3]B
[1] At room temperature, 23°C ± 3K
[2] With 50/125 ?m fiber
[3] Assumes double-ended configuration with 12 dB max link loss. Divide by 2 for single-ended configurations.
If you’re looking to Sell Agilent Wirescope 350 MM 850nm Fiber SmartProbe 4
Features
* Transforms the WireScope 350 and Wirescope 155 into a high performance optical fiber power meter and loss meter
* Probe options for 850nm power loss measurements on multimode fiber
* Measures fiber length up to 50 km for SMF an 4 km for MMF
* Certifies fiber to TIA 568A, TIA 568B.3 and ISO 11801
* Network-specific pass/fail determination for 25 fiber interfaces, including Gigabit Ethernet
* Fibers can be tested individually or in pairs for faster testing
* Automatic set up through the WireScope 350 and WireScope 155 intelligent test port interface
* PC upload and management of test results with ScopeData Pro software
Operation
Attaching the Fiber SmartProbe+ transforms the WireScope 350 into a high performance optical fiber power meter and loss meter. The Fiber SmartProbe+ product line consists of a family of fiber optic test probes, each of which can function as both a transmitter and a detector. The detectors of all Fiber SmartProbes+ support 850 nm measurements for multimode. This architecture supports both single-ended and double-ended measurements and allows Fiber SmartProbes+ to be used together for double-ended measurements.
Certifies Fiber for Gigabit Ethernet
Fiber SmartProbes+ provide fast and comprehensive certification of installed fiber for use with Gigabit Ethernet equipment. Test profiles are available for both 1000BaseSX and 1000BaseLX and for multimode and singlemode fiber. Fiber SmartProbes+ support a total of 25 network-specific certification tests (see specifications section for detail).
Superior Measurement Performance
Length and propagation delay measurement capabilities are included in the multimode and singlemode Fiber SmartProbe+ modules. As data rates increase on LAN and WAN backbones, maximum feasible fiber transmission distances decrease. For example, a popular version of Gigabit Ethernet can only span 260 meters over optical fiber. It is therefore critical to verify compliance with the maximum length restrictions appropriate for the fiber type and network topologies planned for any new or existing installation. Fiber SmartProbes+ are faster and less expensive than an OTDR – the only alternative to perform this function.
Automatic Loss Budget Certification
TIA 568A, 568B.3 and ISO 11801 contain loss budgets that define the maximum allowable loss for installed fibers as a function of fiber length and the number of splices in a link. Until now, verifying compliance with these loss budgets required expensive OTDR equipment and manual calculations. Fiber SmartProbes+ automate this process to produce fast and accurate loss budget certifications with full test result documentation storage as you go.
Professional-Quality Reports
ScopeData Pro cable test data management and reporting software is bundled with the WireScope and Fiber SmartProbes+ at no additional charge. Scope Data Pro can upload stored fiber and copper test results into the same database for organized and convenient reporting.
Buying, Selling, Trading Agilent Wirescope 350
Specifications
Detector
* Receive Wavelengths: Multimode: 850
* Measurement Accuracy: +/- 0.2 dB @ -20 dBm
* Dynamic Range: Multimode: 0 to -40 dBm
* Detector Type: Germanium
Transmitter
* Power Output: Multimode (into 62.5/125 fiber): -11 dBm
* Source Type: LED
Propagation Delay
* Accuracy (whichever is greater): +/- 4% or +/- 1.5 ns (WS 350); +/- 4% or +/- 6.7 ns (WS 155)
* Resolution: +/- 1.5 ns (WS 350); +/- 6.7 ns (WS 155)
* Range: 0 – 300 µs
Cable Length
* Accuracy (whichever is greater): +/- 4% or +/- 0.3 meters (WS 350) or +/- 1.3 meters (WS 155)
* Resolution: +/- 0.3 meters (WS 350) @ 67% NVP; +/- 1.3 meters (WS 155) @ 67% NVP
* Distance Range1: Multimode: 0 – 4 km for 3.75 dB/km @ 850 nm
If you’re selling your Agilent Wirescope 350 please fill out form on the right hand side of page.
If you’re looking to Sell Agilent Wirescope 350 SM 1310nm Fiber SmartProbe 4
Features
* Transforms the WireScope 350 and Wirescope 155 into a high performance optical fiber power meter and loss meter
* Probe options for 1310nm power loss measurements on singlemode fiber
* Measures fiber length up to 50 km for SMF an 4 km for MMF
* Certifies fiber to TIA 568A, TIA 568B.3 and ISO 11801
* Network-specific pass/fail determination for 25 fiber interfaces, including Gigabit Ethernet
* Fibers can be tested individually or in pairs for faster testing
* Automatic set up through the WireScope 350 and WireScope 155 intelligent test port interface
* PC upload and management of test results with ScopeData Pro software
Operation
Attaching the Fiber SmartProbe+ transforms the WireScope 350 into a high performance optical fiber power meter and loss meter. The Fiber SmartProbe+ product line consists of a family of fiber optic test probes, each of which can function as both a transmitter and a detector. The detectors of all Fiber SmartProbes+ support 1310 nm measurements for singlemode. This architecture supports both single-ended and double-ended measurements and allows Fiber SmartProbes+ to be used together for double-ended measurements.
Certifies Fiber for Gigabit Ethernet
Fiber SmartProbes+ provide fast and comprehensive certification of installed fiber for use with Gigabit Ethernet equipment. Test profiles are available for both 1000BaseSX and 1000BaseLX and for multimode and singlemode fiber. Fiber SmartProbes+ support a total of 25 network-specific certification tests (see specifications section for detail).
Superior Measurement Performance
Length and propagation delay measurement capabilities are included in the multimode and singlemode Fiber SmartProbe+ modules. As data rates increase on LAN and WAN backbones, maximum feasible fiber transmission distances decrease. For example, a popular version of Gigabit Ethernet can only span 260 meters over optical fiber. It is therefore critical to verify compliance with the maximum length restrictions appropriate for the fiber type and network topologies planned for any new or existing installation. Fiber SmartProbes+ are faster and less expensive than an OTDR – the only alternative to perform this function.
Automatic Loss Budget Certification
TIA 568A, 568B.3 and ISO 11801 contain loss budgets that define the maximum allowable loss for installed fibers as a function of fiber length and the number of splices in a link. Until now, verifying compliance with these loss budgets required expensive OTDR equipment and manual calculations. Fiber SmartProbes+ automate this process to produce fast and accurate loss budget certifications with full test result documentation storage as you go.
Professional-Quality Reports
ScopeData Pro cable test data management and reporting software is bundled with the WireScope and Fiber SmartProbes+ at no additional charge. Scope Data Pro can upload stored fiber and copper test results into the same database for organized and convenient reporting.
Buying, Selling, Trading Agilent Wirescope 350
Specifications
Detector
* Receive Wavelengths: Singlemode: 1310nm
* Measurement Accuracy: +/- 0.2 dB @ -20 dBm
* Dynamic Range: Singlemode: 0 to -40 dBm
* Detector Type: Germanium
Transmitter
* Power Output: Singlemode (into 9/125 fiber):-5 dBm (1310 & 1550 nm)
* Source Type: Stabilized Class 1 LASER product in accordance with EN 60825.1 and FDA 21 CFR 1040.10
Propagation Delay
* Accuracy (whichever is greater): +/- 4% or +/- 1.5 ns (WS 350); +/- 4% or +/- 6.7 ns (WS 155)
* Resolution: +/- 1.5 ns (WS 350); +/- 6.7 ns (WS 155)
* Range: 0 – 300 µs
Cable Length
* Accuracy (whichever is greater): +/- 4% or +/- 0.3 meters (WS 350) or +/- 1.3 meters (WS 155)
* Resolution: +/- 0.3 meters (WS 350) @ 67% NVP; +/- 1.3 meters (WS 155) @ 67% NVP
* Distance Range1: Singlemode: 0 – 50 km for 0.5 dB/km @ 1310 & 1550 nm
If you’re selling your Agilent Wirescope 350 please fill out form on the right hand side of page.
If you’re looking to Sell Agilent Wirescope 350 MM 1300nm Fiber SmartProbe 4
Features
* Transforms the WireScope 350 and Wirescope 155 into a high performance optical fiber power meter and loss meter
* Probe options for 1300nm power loss measurements on multimode fiber
* Measures fiber length up to 50 km for SMF an 4 km for MMF
* Certifies fiber to TIA 568A, TIA 568B.3 and ISO 11801
* Network-specific pass/fail determination for 25 fiber interfaces, including Gigabit Ethernet
* Fibers can be tested individually or in pairs for faster testing
* Automatic set up through the WireScope 350 and WireScope 155 intelligent test port interface
* PC upload and management of test results with ScopeData Pro software
Operation
Attaching the Fiber SmartProbe+ transforms the WireScope 350 into a high performance optical fiber power meter and loss meter. The Fiber SmartProbe+ product line consists of a family of fiber optic test probes, each of which can function as both a transmitter and a detector. The detectors of all Fiber SmartProbes+ support 1300 nm measurements for multimode. This architecture supports both single-ended and double-ended measurements and allows Fiber SmartProbes+ to be used together for double-ended measurements.
Certifies Fiber for Gigabit Ethernet
Fiber SmartProbes+ provide fast and comprehensive certification of installed fiber for use with Gigabit Ethernet equipment. Test profiles are available for both 1000BaseSX and 1000BaseLX and for multimode and singlemode fiber. Fiber SmartProbes+ support a total of 25 network-specific certification tests (see specifications section for detail).
Superior Measurement Performance
Length and propagation delay measurement capabilities are included in the multimode and singlemode Fiber SmartProbe+ modules. As data rates increase on LAN and WAN backbones, maximum feasible fiber transmission distances decrease. For example, a popular version of Gigabit Ethernet can only span 260 meters over optical fiber. It is therefore critical to verify compliance with the maximum length restrictions appropriate for the fiber type and network topologies planned for any new or existing installation. Fiber SmartProbes+ are faster and less expensive than an OTDR – the only alternative to perform this function.
Automatic Loss Budget Certification
TIA 568A, 568B.3 and ISO 11801 contain loss budgets that define the maximum allowable loss for installed fibers as a function of fiber length and the number of splices in a link. Until now, verifying compliance with these loss budgets required expensive OTDR equipment and manual calculations. Fiber SmartProbes+ automate this process to produce fast and accurate loss budget certifications with full test result documentation storage as you go.
Professional-Quality Reports
ScopeData Pro cable test data management and reporting software is bundled with the WireScope and Fiber SmartProbes+ at no additional charge. Scope Data Pro can upload stored fiber and copper test results into the same database for organized and convenient reporting.
Buying, Selling, Trading Agilent Wirescope 350
Specifications
Detector
* Receive Wavelengths: Multimode: 1300
* Measurement Accuracy: +/- 0.2 dB @ -20 dBm
* Dynamic Range: Multimode: 0 to -40 dBm
* Detector Type: Germanium
Transmitter
* Power Output: Multimode (into 62.5/125 fiber): -11 dBm
* Source Type: LED
Propagation Delay
* Accuracy (whichever is greater): +/- 4% or +/- 1.5 ns (WS 350); +/- 4% or +/- 6.7 ns (WS 155)
* Resolution: +/- 1.5 ns (WS 350); +/- 6.7 ns (WS 155)
* Range: 0 – 300 µs
Cable Length
* Accuracy (whichever is greater): +/- 4% or +/- 0.3 meters (WS 350) or +/- 1.3 meters (WS 155)
* Resolution: +/- 0.3 meters (WS 350) @ 67% NVP; +/- 1.3 meters (WS 155) @ 67% NVP
* Distance Range1: Multimode: 0 – 4 km for 3.75 dB/km @ 850 nm
If you’re selling your Agilent Wirescope 350 please fill out form on the right hand side of page.
If you’re looking to Sell WireScope N2597A-040 Singlemode SmartProbe Fiber
Agilent N2597A-040 2 Way SM (Single mode) Fiber SmartProbe+ 1310 and 1550 nm SmartProbes
Singlemode
Singlemode Fiber SmartProbes simplify installation testing and certification in mixed twisted pair and fiber optic installations. Attaching the Fiber SmartProbe transforms the WireScope350 WireScope155 & FrameScope350 into a high performance optical fiber power meter and loss meter. The Fiber SmartProbe+ kit will measure fiber length, propagation delay and optical loss.
Buying, Selling, Trading WireScope N2597A-040
Features:
* Transforms the FrameScope 350 WireScope 350 & Wirescope 155 into a high performance optical fiber power meter and loss meter
* Measures fiber length up to 4 km for Singlemode Fiber
* Certifies fiber to TIA 568A, TIA 568B.3 and ISO 11801
* Network-specific pass/fail determination for 25 fiber interfaces, including Gigabit Ethernet
* Fibers can be tested individually or in pairs for faster testing operation
* Automatic set up through the FrameScope 350 and WireScope 350 intelligent test port interface
* PC upload and management of test results with ScopeData Pro software
* Ability to store copper & fiber test results in the same database
If you’re selling your WireScope N2597A-040 please fill out form on the right hand side of page.
If you’re looking to Sell Wirescope N2597A-030 Multimode SmartProbe Fiber
Agilent WireScope 350 Multimode Fiber SmartProbe Adapters 850 nm & 1300 nm
Multimode Fiber SmartProbes simplify installation testing and certification in mixed twisted pair and fiber optic installations. Attaching the Fiber SmartProbe transforms the WireScope350 WireScope155 & FrameScope350 into a high performance optical fiber power meter and loss meter. The Fiber SmartProbe+ kit will measure fiber length, propagation delay and optical loss.
* Transforms the FrameScope 350 WireScope 350 & Wirescope 155 into a high performance optical fiber power meter and loss meter
* Measures fiber length up to 4 km for Multimode Fiber
* Certifies fiber to TIA 568A, TIA 568B.3 and ISO 11801
* Network-specific pass/fail determination for 25 fiber interfaces, including Gigabit Ethernet
* Fibers can be tested individually or in pairs for faster testing operation
* Automatic set up through the FrameScope 350 and WireScope 350 intelligent test port interface
* PC upload and management of test results with ScopeData Pro software
* Ability to store copper & fiber test results in the same database
Buying, Selling, Trading Wirescope N2597A-030
If you’re selling your Wirescope N2597A-030 please fill out form on the right hand side of page.
If you’re looking to Sell Agilent FrameScope350 w MM & SM Fiber SmartProbes
The Framescope 350 is a truly innovative hand-held tester that combines an excellent network discovery tool with a complete suite of network and server diagnostic tests and a full Cat 6 cable test and verification option. The unit is operated by simply touching the large touch-sensitive colour screen and an intuitive “drill-down” menu approach takes you logically through each test step.
Features at a glance :
First-of-its-kind innovative performance test suite that measures & rates the response times of key network resources such as web, file, e-mail, print DNS and DHCP servers.
Easy to use color touch screen interface minimizes training requirements.
Network discovery lets users survey the network and generate a complete list of workstations, switches, routers, servers and other network devices.
Verifies performance of vital network services as well as full Category 6 cable certification!
Complete network testing that quickly isolates protocol, configuration, performance and cabling problems.
Detailed network test reports via the web interface and the included ScopeData Pro software produces graphical cable test reports.
Remote control through a web browser allows operation from location on the network.
Easy network installation and management:
Pinpoint errors and misconfigurations to quickly diagnose and troubleshoot network problems:
Exceptionally easy to use and understand:
Performance evaluations to automate and simplify network service testing and pre-qualification:
Perform Category 6 and Fiber Optic Cable testing to certify physical cabling infrastructure:
Remote control for remote office support or historical data collection:
Buying, Selling, Trading Agilent FrameScope350
Multimode fiber adapters:
Fiber SmartProbes provide loss and length testing for multimode and singlemode Fiber optic cable…
ScopeData Pro is a Windows based software application that allows downloading, printing, and analysis of copper and fiber cable test results. The software is included at no extra charge.Features:
Singlmode Fiber Adapters:Singlemode Fiber SmartProbes simplify installation testing and certification in mixed twisted pair and fiber optic installations. Attaching the Fiber SmartProbe transforms the WireScope350 WireScope155 & FrameScope350 into a high performance optical fiber power meter and loss meter. The Fiber SmartProbe+ kit will measure fiber length, propagation delay and optical loss.
|
If you’re selling your Agilent FrameScope350 please fill out form on the right hand side of page.
If you’re looking to Sell Agilent FrameScope 350 w/ MM Fiber SmartProbes
The Framescope 350 is a truly innovative hand-held tester that combines an excellent network discovery tool with a complete suite of network and server diagnostic tests and a full Cat 6 cable test and verification option. The unit is operated by simply touching the large touch-sensitive colour screen and an intuitive “drill-down” menu approach takes you logically through each test step.
Features at a glance
– First-of-its-kind innovative performance test suite that measures & rates the response times of key network resources such as web, file, e-mail, print DNS and DHCP servers
– Easy to use color touch screen interface minimizes training requirements
– Network discovery lets users survey the network and generate a complete list of workstations, switches, routers, servers and other network devices
– Verifies performance of vital network services as well as full Category 6 cable certification
– Complete network testing that quickly isolates protocol, configuration, performance and cabling problems
– Detailed network test reports via the web interface and the included ScopeData Pro software produces graphical cable test reports
– Remote control through a web browser allows operation from location on the network
* Easy network installation and management
The FrameScopeTM 350 features an easy-to-use color touch screen and a powerful network discovery capability that allows network installation and maintenance technicians to easily survey the network and generate a complete list of workstations, switches, routers, servers and other network devices.
* Pinpoint errors and misconfigurations to quickly diagnose and troubleshoot network problems
Users can identify 10/100 Mbps Ethernet utilization, broadcasts, collisions and errors – or quickly pinpoint incorrectly assigned subnet masks, misconfigured servers, and duplicate IP addresses.
The FrameScope 350 rapidly discovers and displays all devices in a switched network, giving support staff instant visibility into the IP and IPX devices on different subnets, along with their MAC addresses, Network addresses, and names.
* Exceptionally easy to use and understand
Navigation is achieved simply by touching the item in which you are interested. Each touch drills you down into more detail or to the point you wish to test.
* Performance evaluations to automate and simplify network service testing and pre-qualification
Users can measure how long it takes to download a file or Web page from a specific server on the network using the FrameScopeTM 350 Autotest, eliminating the expense and complexity of performance baselining.
Useful for both network troubleshooting and pre-qualification, the unique Autotest feature allows automatic measurement and reporting of the performance of common network services using objective performance metrics.
* Perform Category 6 and Fiber Optic Cable testing to certify physical cabling infrastructure
Installation technicians can fully test and certify to TIA and international cabling and networking standards. The FrameScopeTM 350 measures length, and noise level, and – with a DualRemote 350 connected to the opposite end of the cable – performs complete cable certification testing including Category 6 / Class E.
Unlike other analyzers, it’s no longer necessary to carry a separate cable tester for certification .
* Remote control for remote office support or historical data collection
Network managers and senior technicians can assist on-site personnel directly from the central office using the FrameScopeTM 350’s web-based remote control capability. In addition, the FrameScope can be placed strategically within the network and controlled remotely to gather statistics over time or perform troubleshooting functions. Test results can be saved to produce professional-quality graphical reports, which can be printed or viewed online.
Buying, Selling, Trading Agilent FrameScope 350
* Multimode Fiber Test Adapters
A high performance optical fiber power meter or loss meter. The Fiber SmartProbe product line consists of a family of fiber optic test probes that measure optical loss, length and propagation delay and tests fibers in pairs or individually.
The Multimode Fiber SmartProbes provide simultaneous loss testing on each fiber at 850 and 1300 nm. Fiber SmartProbes provide loss and length testing for multimode and singlemode Fiber optic cable.
ScopeData Pro is a Windows based software application that allows downloading, printing, and analysis of copper and fiber cable test results. The software is included at no extra charge.
Features include:
• Prints professional-quality preformatted graphic test reports, complete with logos and data plots.
• Uploads copper and fiber test results.
• Limit Wizard function enables user to pre-configure and lock test settings for multiple FrameScope 350/ WireScope 350/WireScope 155 units to ensure consistency.
• Organizes cable tests by site, building, floor, wiring closet, etc., to simplify record navigation.
• Application can be freely distributed with test results to
facilitate customer access to on-line test reports.
• Stores test data in Microsoft Access database format.
• Can be integrated with popular cable management software solutions.
• The software is the ideal system for organizing and analyzing electronic test results for large projects or sites.
If you’re selling your Agilent FrameScope 350 please fill out form on the right hand side of page.
If you’re looking to Sell Agilent Wirescope PRO N2640A w SM/MM Fiber Set
WireScope Pro €“ An Expandable Platform WireScope Pro supports copper cable certification to TIA Categories 3 to 6A and ISO Classes C to E, Class EA and F limits. Sweeping a full 1 GHz in a few seconds, it boosts Cat 6A and Class F autotest measurement times to industry leading speed, and provides a future proof platform.The new WireScope Pro extends the WireScope 350’s capabilities to Category 6A and Classes EA and F cable certification. Cable and network installers gain maximum productivity through industry-leading measurement time, re-designed fiber probes and a new, simultaneous Alien Crosstalk test method.The new WireScope Pro is optimized for testing efficiency: industry-leading measurement speed boosts the test throughput. New Fiber SmartProbes cut test times of optical links by eliminating the need to swap fibers for dual wavelength testing and calibration.Agilent€™s newly developed Alien Crosstalk (AXT) test solution provides superior AXT measurement performance by employing a new, extremely fast and cost-efficient methodology. The new simultaneous measurement method shortens test times from hours to minutes. FEATURES Cat 3 to 6A/ Class C to E, EA and F copper cable certification Test across AC coupled PoE midspan devices Multimode and single mode fiber certification for length and loss Future-proof through 1€¦1000 MHz frequency range and software upgradeability Optional N2648A Alien Crosstalk Stimulator Kits certify copper links for 10GBASE-T in minutes Alien Crosstalk measurement to enable 10GBASE-T Real-time spectral analysis of External (Ambient) Noise to characterize cables in a live network User friendly with vendor managed cable database, pre-defined settings and a full workday of battery life Automatic detection of remote connection improves operator efficiency Supports Autotest and continuous measurement Talkset for easy communication between operators Export test reports into PDF and XML formatsLAN Cabling CertificationTIA Categories 3/5e/5/6/6A ISO/IEC Classes C, D, E, EA, F Alien Crosstalk measurement to certify copper lines for 10GBASE-T Available Option: Professional Network Test option for connectivity validation and service availability testing.Industry ApprovalsComplies with IEC/ISO Level IV and TIA/EIA Level IIIe accuracy specifications, certified by ETL Complies with IEC/ISO Level IV accuracy specifications, certified by ETL View the certificate for Cat 6A View the certificate for Class FMultimode and Single Mode Fiber CertificationLoss and Length up to 8 km (Multimode)/ 50 km (Single Mode) Propagation Delay: 300 µs Range Optical Power: ±0.25 dB Accuracy New dual-wavelength Fiber SmartProbes eliminate fiber swapping for two-wavelength testingMaximum ProductivityRocket-fast Cat 6A and Class F Autotest measurement time of 9 seconds Future-proof 1€¦1000 MHz range and software upgradeability Alien Crosstalk measurement to enable 10GBASE-T Easy to learn user interface consistent with previous generationUnique Alien Crosstalk Testing Methodology In combination with Agilent€™s newly developed Alien Crosstalk Stimulators, WireScope Pro secures critical 10 Gigabit Ethernet installations and upgrades. The new SwiftAXT (Sweep Interleaved Frequency-domain Technique for Alien Crosstalk) technology offers a breakthrough in measurement time, cost of ownership, degree of automation and ease of use, making the method uniquely field suitable and convenient. Faster Measurement and Optimized Workflow Once connected, the DualRemote Pro unit operates entirely remote controlled. User interactions, including restarting running tests, happen on the near end only. The re-designed Fiber SmartProbes eliminate the need to swap fibers for dual-wavelength testing and calibration, optimizing the test throughput and accuracy.Agilent Wirescope PRO N2647MM Multimode 850 nm / 1300 nm Fiber SmartProbes Dual-wavelength Fiber SmartProbes allow the WireScope„¢ Pro to measure length and propagation delay on optical fiber links. Also, they enable high-performance optical loss and power measurement.Buying, Selling, Trading Agilent Wirescope PRO N2640AProduct Specifications:Parameter Description*Size: 79.5mm x 64mm x 44mm (3.1″ x 2.5″ x 1.7″)
*Connectors: 2 x SC (Transmitter, Receiver)
*Operating Temperature: 0°C to +40°C
*Storage Temperature: -40°C to +55°CPower Meter
* Detector Type: InGaAs
* Calibrated Wavelengths: 850 nm, 1300 nm
* Measurement Accuracy: +/- 0.25 dB at €“20 dBm [1][2]
* Power Measurement Range: 0 to €“42 dBmTransmitter
* Source Type: LED
* Center Wavelength: 850 nm, 1300 nm (nominal)
* Output Power: > €“20.5 dBm (into 50/125 ?m fiber)
* Laser Stability: > €“19 dBm (typical, into 62.5/125 ?m fiber)Fiber Network Specifications
* Cabling Standards ANSI/EIA/TIA 568A, 568.3, ISO/IEC 11801
* Ethernet 10GBASE-SR, -SW, -LX4
* Legacy Networks 1000BASE-SX, -LX, -LX10
* ATM/SONET 100BASE-FX
* FDDI/Fiber Channel 10BASE-FL, -FB, Token Ring
ATM-155 (UNI 3.1), ATM-155 SWL,
ATM-622, ATM/SONET OC-3, -OC-12
FDDI, Fiber Channel-SX, -LXPropagation Delay
* Accuracy (whichever is greater): +/-2% or +/-3.6 ns
* Resolution: 4.2 ns
* Measurement Range: 0 to 300 ?sFiber Length
* Accuracy (whichever is greater): +/-2% or +/-0.72 m
* Resolution: 0.83 m at Refractive Index 1.4785
* Distance Range: 0 to 8 km for 1.50 dB/km at 1300 nm [3]B[1] At room temperature, 23°C ± 3K
[2] With 50/125 ?m fiber
[3] Assumes double-ended configuration with 12 dB max link loss. Divide by 2 for single-ended configurations.