Selling Fluke DSX-5000 – We Buy New Used DSX-5000 (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke DSX-5000 Versiv Cat6a LAN Cable Certifier

Fluke Networks DSX-5000 Cable Analyzer
The DSX CableAnalyzer copper test solution enables testing and certification of twisted pair cabling for up to 10 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A or Class FA. Certifying a cable is one part of a process that starts with system design and ends with system acceptance. The faster that process goes, the more profitable you’ll be. Unfortunately, there are a lot of things that slow the process down – setting up the tester incorrectly, testing to the wrong limits, waiting for skilled technicians to analyze and troubleshoot failures, misinterpretation of results, and producing test reports that customers can not understand.

As part of the Versiv cabling certifcation product family, the DSX CableAnalyzer provides accurate, error-free certification. In the installation business there are multiple teams, varying media types and multiple testing requirements. The difference between profitabilty is just a few percentage points. The DSX certifies copper cabling, complies with all standards including Level V accuracy, making jobs easier to manage, and getting to system acceptance faster. It’s not just for the expert technicians and Project Managers. Individuals of various skill levels can improve the set-up, operation, test reporting, and simultaneously manage diverse projects.

Versiv Platform is Ready for Today’s and Tomorow’s Jobs
Electrically centered plug design is compliant with proposed ISO (IEC WG9 Standard IEC61935-1) Level V accuracy requirements to 1000 MHz with a future-ready design to support all hardware upgrades

The DSX-5000 CableAnalyzer enables cable testing and certification for 10 Gigabit Ethernet deployments – whether it is an existing Cat 5e, Cat 6, Cat 6A or Class FA cabling system, the DSX tests to all industry standards. The electrically centered test plug results in the Level V accuracy designation introduced with IEC to support field testing to Class FA, 1000 MHz. The DSX exceeds the IEC Level V specification with less than half the allowable crosstalk margin, assuring you of higher confidence in results over the full frequency range. Higher performance cabling systems like Cat 6A have less tolerance to interference and less noise margin in general. Additionally complex Alien Crosstalk link-to-link certification is simplified by integrating the measurement capability into each copper module for 10GBASE-T testing.

The DSX is the first field tester to support balance measurements including Transverse Conversion Loss (TCL) and Equal Level Transverse Conversion Transfer Loss (ELTCTL). TCL and ELTCTL are important measurements found in the cabling standards. They define a minimum performance for balance, the key parameter to help determine noise immunity. Industrial network owners/operators are especially interested in this property as it is a key parameter to help determine electromagnetic interference (EMI).

Fluke Networks’ DSX-5000 CableAnalyzer meets the Intertek (ETL) Certification in accordance with the IEC-61935-1 specifications for accuracy Level IV, the draft accuracy Level V and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

ProjX Management System Manages Complex Jobs with Ease
Manage up to 12,000 test results with full graphics

Managing the testing of multiple jobs with multiple teams, testers, and requirements is time consuming and can be hard to manage. Increasingly larger jobs make project organization more important than ever. The new ProjX management system on the DSX- 5000 provides individual project files for all job specific details to be saved under a simple name. Eliminating the need to re-enter job specific details after starting a project. This minimizes set-up errors or lost files when switching from one job to another or utilizing multiple testers on a single job. In addition, it provides test results by cable ID, merges any changes without duplicates and always defaults to the last copper or fiber module installed. ProjX management system provides real time status to completion on each job with a 0-100% scale and gives the operator the option to isolate any test requiring a second look and helps to assure nothing is overlooked. The “Fix Later” selection creates a punch list or automatic to do list for correcting any workmanship. ProjX enables project managers and crew leaders to be truly efficient.

Taptive User Interface Simplifies Set Up, Eliminates Errors and Speeds Troubleshooting
Capacitive touchscreen allows quick tester setup and supports all standards

Taptive user interface is easy enough for even the newest technician to perform tests across multiple media types and testing requirements. The capacitive Taptive user interface makes all jobs easily accessible from the menu screen. Touch the job you’re working on and the large display confirms the test that needs to be performed, animated instructions simplify setting the tester configuration making correct testing assured.

Performs with Unsurpassed Speed
Ten second Cat 6A test time and the fastest way to submit your certification results

No tester offers so much speed for so many tests. Complete copper certification to Cat 6A in 10 seconds or certify two fibers at two wavelengths in both directions in just 3 seconds. Endorsed by cabling vendors worldwide assures that Versiv is the fastest way to project completion and system acceptance. Quickly get a Pass or Fail result and easily review individual test parameters by value or drill into specific area on a graph.

Troubleshoot Like an Expert
Graphically displays the source of failures including crosstalk and distance to shield faults for faster troubleshooting

The DSX reduces the time required to fix cabling faults with Dedicated Diagnostics, a simple 1 button test runs all tests and saves all data. The graphical results screen allows you to look down the cable to see exactly where any cross talk, return loss or shield faults are happening on any given link. Previous testers had frequency limits of their diagnostic capabilities of up to 250 MHz only, but the DSX CableAnalyzer has no limitation. This common view is easily interpreted by novice and expert users alike to isolate and act on any failed results quickly and is stored with the test result for remote analysis.

Buying, Selling, Trading Fluke DSX-5000

Features:

  • Versiv enables users to accomplish more than ever with a cable tester, by accelerating every step of the testing process
  • ProjX management system eases tasks from initial set-up of a job to system acceptance. It eliminates redundant steps, and ensures that all tests are completed correctly the first time, and every time.
  • Taptive user interface puts advanced data analysis and easy set-up and operation at the fingertips of of technicians of all skill levels.
  • The DSX reduces the time required to fix cabling faults with Dedicated Diagnostics, a simple test that locates the problem

Performance:

  • Ten second Cat 6A test time contributes to the fastest way to gain certification
  • Graphically displays the source of failures including crosstalk and distance to shield faults for faster troubleshooting
  • Manage up to 12,000 test results with full graphics
  • Capacitive touchscreen allows quick tester setup with easily selectable cable types, standards and testing parameters

Standards:

  • Compliant with proposed ISO (IEC WG9 Standard IEC61935-1) Level V accuracy requirements to 1000 MHz
  • Supports the complete suite of Resistance Unbalance standards needed for Power over Ethernet (PoE) – IEC61935-1 & 11801-1-4, IEEE 802.3af, IEEE 802.3at, ANSI/TIA/EIA-568-C.2
  • Next generation balance drafts – IEEE 802.3, TIA TR42.7

If you’re selling your Fluke DSX-5000 please fill out form on the right hand side of page.

Selling Fluke DTX-CERTIFIBER-M – We Buy New Used DTX-CERTIFIBER-M (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke DTX-CERTIFIBER-M MM Fiber Loss Test Set

Fluke Networks DTX-CLT Certifiber Optical Loss Test Set

The DTX-CLT CertiFiber® Optical Loss Test Set allows you to accurately certify two fibers concurrently over two wavelengths according to custom requirements or established industry specifications. Quickly and efficienty conduct troubleshooting with a conveniently integrated Visual Fault Locator (VFL).

Fast and easy fiber certification
Using the same platform and interface as the renowned DTX™ CableAnalyzer, the DTX-CLT CertiFiber® Optical Loss Test Set certifies fiber according to industry standards by quickly providing four measurements on two fibers and returning a PASS/FAIL result – without having to take the time to swap the main and remote units as you would have to with traditional test sets. Such speed and efficiency in testing can easily save you more than 100 hours per year! Also, unlike most competing OLTS, the DTX-CLT CertiFiber actually measures fiber length for you, ensuring that you do not have to rely on often undependable sheath labeling or pacing methods.

Integrated troubleshooting capability
Occasional failures are a reality in testing. The DTX-CLT CertiFiber’s on-board VFL helps you to quickly troubleshoot basic causes of failures such as breaks and macrobends. The bright laser VFL can easily highlight near-end fiber faults in addition to verifying polarity and continuity.

Professional documentation reporting
Test reports are often required as proof of quality. Use LinkWare to upload and manage test results from Fluke Networks’ family of industry-leading copper and fiber cabling testers including the DTX™ CableAnalyzer, OptiFiber® OTDR, and SimpliFiber Pro® Optical Power Meter and Fiber Test Kits.

Features:

  • 12-second Autotest – loss measurement of two fibers at two wavelengths, optical link budget calculation, and a PASS/FAIL analysis
  • Fast and professional test result documentation via the widely-used LinkWare reporting software
  • Optimized for applications ranging up to 10-Gig
  • Interchangeable multimode and singlemode modules (which are also compatible with the popular DTX™ CableAnalyzer)
  • Accurate fiber length measurement eliminate haphazard guessing
  • Continuity and polarity verification
  • Easy-to-use and widely-recognized DTX-based interface
  • On-board VFL to locate fibers and breaks
  • Speedy testing with FINDFIBER, MONITOR, single and bidirectional test features
  • Supports various small form factor (SFF) fiber connectors

Buying, Selling, Trading Fluke DTX-CERTIFIBER-M

If you’re selling your Fluke DTX-CERTIFIBER-M please fill out form on the right hand side of page.

Selling Fluke Networks DTX-CLT – We Buy New Used DTX-CLT (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Networks DTX-CLT Smart Remote

DTX-CLT CertiFiber® Optical Loss Test Set
Efficient Optical Loss Test Set (OLTS) for quick fiber certification.Features:

  • 12 second Autotest – loss measurement of two fibers at two wavelengths, optical link budget calculation, and a PASS/FAIL analysis
  • Fast and professional test result documentation via the widely-used LinkWare reporting software
  • Optimized for applications ranging up to 10 Gig
  • Interchangeable multimode and singlemode modules (which are also compatible with the popular DTX CableAnalyzer™ Series)
  • Accurate fiber length measurement – eliminate haphazard guessing!
  • Continuity and polarity verification
  • Easy-to-use and widely-recognized DTX-based user interface
  • On-board visual fault locator (VFL) to locate fibers and breaks
  • Supports various small form factor (SFF) fiber connectors+

Buying, Selling, Trading Fluke Networks DTX-CLT

Because present-day enterprise data networks increasingly rely on fiber optic cabling, it is more important than ever for installers and network owners to use Optical Loss Test Sets (OLTS) certify and document that their fiber links meet established industry standards to protect against network downtime and lost revenue.The Fluke Networks DTX-CLT CertiFiber® OLTS enables you to easily and accurately certify two fibers concurrently over two wavelengths according to custom requirements or established industry specifications. Quickly and efficiently conduct troubleshooting with a convenient integrated Visual Fault Locator (VFL).The DTX-CLT CertiFiber OLTS does not certify copper cable.

If you’re selling your Fluke Networks DTX-CLT please fill out form on the right hand side of page.

Selling Fluke Microtest Fiber Optical – We Buy New Used Fiber Optical (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Microtest Fiber Optical Certifiber Remote

Fluke Microtest Certifiber Remote only. Used with the Certifiber Fiber Optic Multimode Test Kit.

Buying, Selling, Trading Fluke Microtest Fiber Optical

Includes:
Fluke Microtest Certifiber Remote

If you’re selling your Fluke Microtest Fiber Optical please fill out form on the right hand side of page.

Selling Fluke Microtest CertiFiber MM – We Buy New Used CertiFiber MM (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Microtest CertiFiber MM Fiber Optic Test Set

Fluke Microtest CertiFiber to test more fibers in less time.

With its one-button “Autotest”, CertiFiber allows you to measure fiber length and optical loss on two fibers at two wavelengths, compares the results to the selected industry standard and provides an instant PASS or FAIL indication.

Buying, Selling, Trading Fluke Microtest CertiFiber MM

Features:

Advanced multimode fiber certification

Automatically measures length and dual-wavelength loss over two fibers in a single Autotest operation

Cut test time by 75% over manual power meter

Easily manage and document copper and fiber links with new LinkWare Software

Includes:

CertiFiber Main
CertiFiber Remote
(2) MM ST-SC Fiber Test Cables
(2) ST-ST Connectors
LinkWare Software
Carrying Case
DM9M to DB9F Serial Cable
User Guide

If you’re selling your Fluke Microtest CertiFiber MM please fill out form on the right hand side of page.

Selling Fluke Microtest CertiFiber MM – We Buy New Used CertiFiber MM (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Microtest CertiFiber MM Fiber Optic Tester

Advanced certification for multimode fiber networks

Certification of fiber optic links requires the right test tools, detailed knowledge of installation and application standards, and the ability to document your test results. Fluke Networks’ CertiFiber meets this challenge with the industry’s first dedicated handheld tester for certification of multimode networks. CertiFiber makes fiber certification fast. You press one-button and CertiFiber measures fiber length and optical loss on two fibers at two wavelengths, computes the optical loss budget, compares the results to the selected industry standard and provides an instant PASS or FAIL indication. Save, then upload, manage and report results with free LinkWareTM Software. Look to CertiFiber to test more fibers in less time.

Features

  • Tests two multimode fibers at two wavelengths in a single automated Autotest operation
  • Measures optical power and loss at 850 nm and 1300 nm using LED dual-wavelength sources
  • Provides clear PASS or FAIL indication with automated results analysis
  • Enables bi-directional testing without swapping main and remote units
  • Saves 1000 Autotest results under customized job and circuit ID names
  • Features a standards library for easy set-up
  • Incorporates interchangeable connector adapters for simple network connection
  • LinkWare™ Software documents, reports and manages all test data
  • Is ruggedly built for demanding field use

Autotest is the key

CertiFiber’s Autotest feature takes the work out of fiber certification. When you press the Autotest button, you set in motion a sequence of tasks – loss measurement of two fibers at two wavelengths, length measurement, optical link budget calculation, and PASS/FIAL analysis. The result is a clear PASS or FAIL for every fiber tested.

Save time and increase productivity

A CertiFiber kit includes a main and remote unit where each unit incorporates a dual wavelength 850/1300 nm LED source and an optical power meter. This enables testing of a Tx/Rx fiber pair at two wavelengths in a single Autotest-initiated operation. Bi-directional testing is simple too. In bi-directional mode, simply reverse Tx/Rx fibers at the patch panel or outlet when prompted and CertiFiber measures each fiber at both wavelengths in both directions – without having to swap sources and meters as with a traditional test set. CertiFiber cuts your test time by 75% over traditional techniques.

CertiFiber connects easily to your network. Interchangeable connector adapters permit simple network connection and straightforward reference power measurement. Interchangeable connector adapters are available in the most popular connector styles.

Reporting made simple

Most often your customer or management requires a test report. With CertiFiber, you can easily produce professional certification reports showing the PASS/FAIL status of every fiber in the network. CertiFiber stores 1000 Autotest results in memory. Quickly upload test results from CertiFiber to your PC using LinkWare Software that comes with your CertiFiber. Manage test results, print professional reports or export data into popular spreadsheet formats.

Fluke Networks delivers Network SuperVision

Fluke Networks is committed to providing innovative Network SuperVision Solutions.™ From innovative technology and tools that comply with standards, to responsive service and training to help you grow your business, Fluke Networks will help you keep pace in today’s fast moving, networked world by keeping our eye on the future for you. That’s Network SuperVision. That’s Fluke Networks’ promise to you.

Buying, Selling, Trading Fluke Microtest CertiFiber MM

If you’re selling your Fluke Microtest CertiFiber MM please fill out form on the right hand side of page.

Selling Fluke Microtest CertiFiber MM – We Buy New Used CertiFiber MM (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Microtest CertiFiber MM Fiber Test Set

Advanced certification for multimode fiber networks

Certification of fiber optic links requires the right test tools, detailed knowledge of installation and application standards, and the ability to document your test results. Fluke Networks’ CertiFiber meets this challenge with the industry’s first dedicated handheld tester for certification of multimode networks. CertiFiber makes fiber certification fast. You press one-button and CertiFiber measures fiber length and optical loss on two fibers at two wavelengths, computes the optical loss budget, compares the results to the selected industry standard and provides an instant PASS or FAIL indication. Save, then upload, manage and report results with free LinkWareTM Software. Look to CertiFiber to test more fibers in less time.

Features

  • Tests two multimode fibers at two wavelengths in a single automated Autotest operation
  • Measures optical power and loss at 850 nm and 1300 nm using LED dual-wavelength sources
  • Provides clear PASS or FAIL indication with automated results analysis
  • Enables bi-directional testing without swapping main and remote units
  • Saves 1000 Autotest results under customized job and circuit ID names
  • Features a standards library for easy set-up
  • Incorporates interchangeable connector adapters for simple network connection
  • LinkWare™ Software documents, reports and manages all test data
  • Is ruggedly built for demanding field use

Autotest is the key

CertiFiber’s Autotest feature takes the work out of fiber certification. When you press the Autotest button, you set in motion a sequence of tasks – loss measurement of two fibers at two wavelengths, length measurement, optical link budget calculation, and PASS/FIAL analysis. The result is a clear PASS or FAIL for every fiber tested.

Save time and increase productivity

A CertiFiber kit includes a main and remote unit where each unit incorporates a dual wavelength 850/1300 nm LED source and an optical power meter. This enables testing of a Tx/Rx fiber pair at two wavelengths in a single Autotest-initiated operation. Bi-directional testing is simple too. In bi-directional mode, simply reverse Tx/Rx fibers at the patch panel or outlet when prompted and CertiFiber measures each fiber at both wavelengths in both directions – without having to swap sources and meters as with a traditional test set. CertiFiber cuts your test time by 75% over traditional techniques.

CertiFiber connects easily to your network. Interchangeable connector adapters permit simple network connection and straightforward reference power measurement. Interchangeable connector adapters are available in the most popular connector styles.

Reporting made simple

Most often your customer or management requires a test report. With CertiFiber, you can easily produce professional certification reports showing the PASS/FAIL status of every fiber in the network. CertiFiber stores 1000 Autotest results in memory. Quickly upload test results from CertiFiber to your PC using LinkWare Software that comes with your CertiFiber. Manage test results, print professional reports or export data into popular spreadsheet formats.

Fluke Networks delivers Network SuperVision

Fluke Networks is committed to providing innovative Network SuperVision Solutions.™ From innovative technology and tools that comply with standards, to responsive service and training to help you grow your business, Fluke Networks will help you keep pace in today’s fast moving, networked world by keeping our eye on the future for you. That’s Network SuperVision. That’s Fluke Networks’ promise to you.

Buying, Selling, Trading Fluke Microtest CertiFiber MM

Includes:

  • Microtest CertiFiber Main
  • Microtest CertiFiber Multimode Remote
    • 850nm
    • 1300nm
  • (2) MM ST-ST Fiber Cables
  • (2) ST-ST Connectors
  • Fluke LinkWare Cable Management Software
  • Carrying Case
  • (4) Texwipe AlcoPads
  • RS232 PC Interface Cable
  • User Manual on CD-ROM

If you’re selling your Fluke Microtest CertiFiber MM please fill out form on the right hand side of page.

Selling Fluke Microtest OMNIFiber– We Buy New Used OMNIFiber (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Microtest OMNIFiber Multimode Fiber Module

OMNIFiber MM Adapter

OMNIFiber is the first fiber adapter capable of supporting measurements for both single-and multimode fiber. OMNIFiber snaps onto the top of OMNIScanner 2, Omniscanner 1 & Omnscanner LT copper cable tester to transform it into a Multi-mode fiber certification tool. Using the OMNIFiber adapter, OMNIScanner provides a one-button “Autotest” that measures multimode length, loss and propagation delay on both transmit and receive fibers at 850 and 1300 nm simultaneously. It then compares the results to the appropriate industry standard and provides a simple PASS/FAIL indication of the tested link. With single mode fiber, OMNIScanner measures loss on transmit and receive fibers at 1310 nm.
* Dual-fiber, dual wavelength, multimode certification with OMNIFiber Adapters
* Easily manage and document copper and fiber links with LinkWare software

Buying, Selling, Trading Fluke Microtest OMNIFiber

Includes:
* OMNIFiber Multimode 850nm/1300nm Fiber Module Adapter
* LINKWARE Software
* Fiber Test Patch Cable ST-SC

If you’re selling your Fluke Microtest OMNIFiber please fill out form on the right hand side of page.

Selling Fluke Networks SM & MM Omnifiber – We Buy New Used SM & MM Omnifiber (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Networks SM & MM Omnifiber Fiber Modules

Features:

  • Certify Singlemode fiber with Fluke Microtest SM OMNIFiber Adapters.
  • Test two fibers at two wavelengths in a single automated operation.
  • Measure fiber length, propagation delay and optical loss.
  • Provide clear PASS or FAIL indication with automated results analysis.
  • Enable bi-directional testing without swapping main and remote units.
  • Feature standards and fiber cable libraries for easy set-up.
  • Incorporate interchangeable connector adapters for simple network connection.
  • Communicate with LinkWareâ„¢ Cable Test Management Software.
  • Quickly snap onto any OMNIScanner® series cable analyzer.
  • Are ruggedly built for demanding field use.
  • Test singlemode fiber at 1310 nm and 1550 nm with the laser-based OMNIFiber® SM.
  • Multimode Fiber: Length, Propagation Delay, Loss (850nm & 1300nm)

Buying, Selling, Trading Fluke Networks SM & MM Omnifiber

The right adapter for the job
Your network may contain different fiber types: multimode or singlemode. The way to accurately test and certify your network is with an adapter designed for the job. Fluke Networks offers two OMNIFiber adapters. Use the OMNIFiber MM adapter for multimode fiber. Its LED sources ensure accurate, standards-compliant results when testing multimode fiber. Use the OMNIFiber SM adapter for singlemode fiber. Its laser sources ensure accurate, standards-compliant results when testing singlemode fiber.

Fast and easy testing
Using an OMNIFiber adapter, OMNIScanner provides a one-button “Autotest” that measures fiber length and optical loss on two fibers at two wavelengths in a single automated operation. The scanner then compares the results to the industry standard you select and instantly provides a clear PASS or FAIL indication. Test more fibers in less time with OMNIFiber. OMNIFiber adapters connect easily to the network. Interchangeable connector adapters permit simple network connection and straightforward reference power measurement. Interchangeable connector adapters are available in the most popular
connector styles.

OMNIFiber snaps onto the top of OMNIScanner 2, Omniscanner 1 & Omnscanner LT copper cable tester to transform it into a Multi-mode fiber certification tool. Using the OMNIFiber adapter, OMNIScanner provides a one-button “Autotest” that measures multimode length, loss and propagation delay on both transmit and receive fibers at 850 and 1300 nm simultaneously. It then compares the results to the appropriate industry standard and provides a simple PASS/FAIL indication of the tested link.

  • Dual-fiber, dual wavelength, multimode certification with OMNIFiber Adapters

If you’re selling your Fluke Networks SM & MM Omnifiber please fill out form on the right hand side of page.

Selling Fluke Networks OMNIFiber– We Buy New Used OMNIFiber (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke Networks OMNIFiber SM Fiber Optic Modules

Features:

  • Certify Singlemode fiber with Fluke Microtest SM OMNIFiber Adapters.
  • Test two fibers at two wavelengths in a single automated operation.
  • Measure fiber length, propagation delay and optical loss.
  • Provide clear PASS or FAIL indication with automated results analysis.
  • Enable bi-directional testing without swapping main and remote units.
  • Feature standards and fiber cable libraries for easy set-up.
  • Incorporate interchangeable connector adapters for simple network connection.
  • Communicate with LinkWare™ Cable Test Management Software.
  • Quickly snap onto any OMNIScanner® series cable analyzer.
  • Are ruggedly built for demanding field use.
  • Test singlemode fiber at 1310 nm and 1550 nm with the laser-based OMNIFiber® SM.

Buying, Selling, Trading Fluke Networks OMNIFiber

The right adapter for the job
Your network may contain different fiber types: multimode or singlemode. The way to accurately test and certify your network is with an adapter designed for the job. Fluke Networks offers two OMNIFiber adapters. Use the OMNIFiber MM adapter for multimode fiber. Its LED sources ensure accurate, standards-compliant results when testing multimode fiber. Use the OMNIFiber SM adapter for singlemode fiber. Its laser sources ensure accurate, standards-compliant results when testing singlemode fiber.

Fast and easy testing
Using an OMNIFiber adapter, OMNIScanner provides a one-button “Autotest” that measures fiber length and optical loss on two fibers at two wavelengths in a single automated operation. The scanner then compares the results to the industry standard you select and instantly provides a clear PASS or FAIL indication. Test more fibers in less time with OMNIFiber. OMNIFiber adapters connect easily to the network. Interchangeable connector adapters permit simple network connection and straightforward reference power measurement. Interchangeable connector adapters are available in the most popular
connector styles.

If you’re selling your Fluke Networks OMNIFiber please fill out form on the right hand side of page.