Selling Ideal Lantek 7 – We Buy New Used Lantek 7 (‘s) Top Dollar Paid!

If you’re looking to Sell Ideal Lantek 7 750MHz Cat6a & Multimode Certifier

support a full range of LAN cable testing. The LANTEK family of certification testers uses the IDEAL patented measurement system that removes the effects of ordinary patchcords, thus making channel and permanent link certification of a cable standard such as CAT6A or ISO-F possible without changing adapters. The same patented technology also makes DUALmode Testing possible so the users can get any two test results simultaneously. As a result, the LANTEKs save you money and time on the job.

Features

  • High-performance LANTEK 7 sweeps up to 750 MHz and supports testing requirements up to CAT 6/6a/7/ISO-F and beyond
  • Level IV/IIIe/III accuracy – independently verified by ETL for baseline, channel and permanent link
  • DUALmode testing to save time – reports channel and permanent link test results simultaneously
  • Test with patchcords to save money – performs CAT6/5e/ISO-D/Ea testing with standard patchcords to achieve the lowest cost of ownership
  • Largest internal/external memory capacity – makes record management easy
  • Convenient FIBERTEK™ accessory – simultaneously tests two fibers for attenuation and length
  • Innovative TRACETEK™ accessory – performs advanced fiber fault location and troubleshooting functions

Buying, Selling, Trading FLIR 572Ideal Lantek 7

The Only Tester in the World to Support DUALmode Testing to Save Time and Labor

Save time and money by simultaneously conducting any combination of two tests with LANTEK 7. For example, you can select a combination of channel/permanent link or CAT6a/ISO-F standards and get both test results in virtually the same amount of time as a single test. DUALmode can be used as either a troubleshooting tool or to provide an extra level of confidence to your customers by performing certification to additional test standards that demonstrate the quality of your work.

Unique Adapter Scheme Reduces Cost of Ownership

LANTEK® cable testers utilize an advanced link adapter method to reduce cost of ownership. All testers come with universal link adapters that are used for basic, channel, and permanent link testing. These channel adapters fit into the case of the unit and are locked in place. This creates a stable and repeatable testing platform while eliminating bulky adapters that extend beyond the end of the unit. Simply plug in the appropriate reference patchcord to the channel adapter, to perform permanent link testing.

Multimode Fiber Modules:

The multimode 850nm/1300nm LanTek fiber adapters are the perfect solution for certifying or troubleshooting fiber backbones and fiber to the desktop installations in commercial buildings or campus environments. Working with LANTEK® 6 & 7, it measures signal loss and length over Multimode fiber. With an easy fiber adapter switch, it can support dual wavelength and bidirectional testing.

Using adapters, the LANTEK display unit can measure length in the loop-back mode. Using it in both the display and remote units, the system can measure signal loss and length with dual wavelength and bi-directional capabilities.

 

If you’re selling your Ideal Lantek 7 please fill out form on the right hand side of page.

Selling IDEAL SignalTek-FO – We Buy New Used SignalTek-FO (‘s) Top Dollar Paid!

If you’re looking to Sell IDEAL SignalTek-FO Multimedia Qualification Tester

Product Overview:
The SIGNALTEK-FO is the first and only tester to qualify both copper and fiber-optic cabling to IEEE 802.3 standards. All in one unit that’s less than the price of an optical test set.

With its compact design and soft over-molded sides, the SIGNALTEK-FO fits comfortably in your hands. The easy-to-navigate user interface enables multimedia Gigabit qualification with multimode and single mode capability. You can also perform Bit Error Rate testing and decibel (dB) loss measurements of optical links. Plus, storing and printing qualification reports for copper and fiber jobs are simple using internal memory or USB thumb drives.
SIGNALTEK-FO Capabilities beyond the typical Qualifier

SIGNALTEK-FO offers all of the existing capabilities of the standard SIGNALTEK Qualifier such as Gigabit Ethernet Qualification, test storage and reporting, and active link testing and adds the powerful capability of fiber optic Qualification. Traditional power meter/light source kits only measure the attenuation of fiber optic links. As Gigabit Ethernet is becoming the standard for backbone and zone fiber optic cabling, attenuation tests alone may not be enough to guarantee error-free performance.

SIGNALTEK-FO’s Bit Error Rate testing, adds assurance that fiber optic links can actually support high-speed data in accordance with IEEE 802.3ab standards.

Features:
* Multimode and single mode capability
* Available in 850nm and 1300nm wavelength configurations
* Measure cable attenuation with a dynamic range of up to 20dB
* Guarantee link operation at 1Gbps within IEEE error tolerances

In addition to cable performance qualification, SIGNALTEK can be configured to run for several minutes or hours at a time. While stress testing critical network links, SIGNALTEK transmits hundreds of Gigabits of information across the network while looking for dropped packets. This monitoring mode allows SIGNALTEK to be used to isolate intermittent network problems that are difficult to detect. Adopting the latest generation of Gigabit Ethernet technology, IDEAL’s innovation brings the best performance to this new class of affordable testers.

Buying, Selling, Trading IDEAL SignalTek-FO
Specifications:

Ports/Connections
* USB A/B, DC power input
* Shielded RJ-45 Port :Supports 10/100/1000Mbps Ethernet connections
* Small Form-factor Pluggable (SFP): Supports SFP modules sourced through IDEAL Industries in 850nm and 1300nm wavelengths, 1000Mbps Ethernet

Length Measurement
* RJ-45 Port: TDR length measurement of 1-4 pair cables to 140m/460ft
* SFP Port: No length measurement of fiber optic cables

Bert Error Rate Measurements
* Copper: 10/100/1000Mbps. Error rates tested to IEEE 802.3ab standard
* Fiber: 1000Mbps. Error rates tested to IEEE 802.3ab standard.

Battery Life
* Copper Testing: Approx 15 hours @ 22 tests per hour (45s Autotest)
* Fiber Testing: Recommend use of AC adapters when testing fiber

Included:
* SIGNALTEK Fiber Ready Near-End
* Remote-End Handset
* Carrying Case
* Copper Cable Accessory Kit with Interfaces to RJ45, RJ11, Coax F-Type Cables, and Alligator Clips
* Fiber Optic Cable Accessory Kit:
> 2 Duplex LC-SC 50/125m (2m/7ft) cables
> 2 duplex LC-SC 62.5/125m (2m/7ft) cables
> 1 duplex SC-SC adapter
* 2 AC Power Adapters with International Plugs
* USB Interface Cable
* User Manual on CD-ROM
* Training DVD

If you’re selling your IDEAL SignalTek-FO please fill out form on the right hand side of page.

Selling Wavetek FIBERKIT+ SM – We Buy New Used FIBERKIT+ SM (‘s) Top Dollar Paid!

If you’re looking to Sell Wavetek FIBERKIT+ SM MM Fiber Test Kit

LT8000 FIBERKITS

  • Tests Multimode and Singlemode fiber for power loss
  • LED and laser light sources generate 850 nm and 1300 nm wavelengths on Multimode cable 1310 nm and 1550 nm on Singlemode cable
  • One power meter to test both Multimode and Singlemode

Buying, Selling, Trading Wavetek FIBERKIT+ SM
Features:

  • Automatically test multiple wavelengths without changing connectors or switching settings
  • LED and laser light sources generate 850nm wavelengths on Multimode cable
  • Label and organize test results by direction, drop, project and job. Upload stored fiber tests and create reports using LT Record Manager PC software
  • Supports multiple fiber optic connector configurations

If you’re selling your Wavetek FIBERKIT+ SM please fill out form on the right hand side of page.

Selling Wavetek FS 850 – We Buy New Used FS 850 (‘s) Top Dollar Paid!

If you’re looking to Sell Wavetek FS 850 Light Source for LT8000 FiberKit

MM FiberKit Features:
– Test Multimode fiber optic cable systems for power loss.
– Automatically test multiple wavelengths without changing connectors or switching settings.
– LED and laser light sources generate 850nm and 1300nm wavelengths on Multimode cable.
– Label and organize test results by direction, drop, project and job. Upload stored fiber tests and create reports using LT Record Manager PC software.
– Supports multiple fiber optic connector configurations.
– Compatible with Wavetek LT8155 and LT8600 Cable Analyzers.
– Only the 850nm Light Source Uncluded

Buying, Selling, Trading Wavetek FS 850
Included:
* Wavetek FS+ 850 850nm Light Source
* (1) Multimode ST To ST Fiber Patch Cord
* (1) ST Connectors

If you’re selling your Wavetek FS 850 please fill out form on the right hand side of page.

Selling Ideal Wavetek LT 8155 and LT 8600 – We Buy New Used LT 8155 and LT 8600 (‘s) Top Dollar Paid!

If you’re looking to Sell Ideal Wavetek LT 8155 and LT 8600 Fiber Optic FIBERKIT+MM

FIBERKIT+MM
FIBERKIT for LT8155 and LT8600

Features:

  • Test Multimode fiber optic cable systems for power loss.
  • Automatically test multiple wavelengths without changing connectors or switching settings.
  • LED and laser light sources generate 850nm and 1300nm wavelengths on Multimode cable.
  • Label and organize test results by direction, drop, project and job. Upload stored fiber tests and create reports using LT Record Manager PC software.
  • Supports multiple fiber optic connector configurations.

Buying, Selling, Trading Ideal Wavetek LT 8155 and LT 8600

Fiber optic cable is everywhere.

Many certified copper LAN Cable Installations also have fiber in campus, riser, backbone and desktop applications. now you can also test these critical fiber optic cable runs easier and faster with the FiberKit+ added to your Model LT 8155T or LT 8600T Cable Tester.


Perform more test with less effort

Without changing connectors or switching settings, the FiberKit+ automatically measurespower loss on Multimode cable at 850nm & 1300nm.

If you’re selling your Ideal Wavetek LT 8155 and LT 8600 please fill out form on the right hand side of page.

Selling Wavetek IDEAL LT8600 – We Buy New Used IDEAL LT8600 (‘s) Top Dollar Paid!

If you’re looking to Sell Wavetek IDEAL LT8600 Singlemode & Multimode

Tests up to 300 MHz exceeding the requirement for emerging CAT 6/Class E standards
ETL Certified Level III Accuracy
Performs all advanced Power Sum measurements up to 300 MHz
Built in TDR capability
Options for Singlemode and Multimode fiber optic testing
LT-Record Manager software supports all record keeping, reporting and certification requirements
Supports emerging CAT 6/Class E standards and more!
LT 8600 ships with a soft carrying case
The LT 8600TSP and LT 8600T are 300 MHz Level III high-performance cable certifiers that exceed the requirements for emerging CAT 6/Class E testing standards.

The competitive nature of the cable installation market demands that you are prepared to complete testing activities for every type of network design. The LT 8600TSP and LT 8600T allow you to perform all required tests, including tests on emerging CAT 6/Class E standards, helping you keep pace with new business opportunities.
Tests up to 300 MHz exceeding the requirement for emerging CAT 6/Class E standards
Vendor Specific adapters required for testing CAT 6 systems, see accessory page for listing of available adapters
Performs all advanced Power Sum measurements up to 300 MHz
Supports up to 15 different tests individually or in a test suite
Built in TDR capability
Options for Singlemode and Multimode fiber optic testing
Talkset capability
LT-Record Manager software supports all record keeping, reporting and certification requirements
Easy-to-use button interface
Backed by IDEAL’s world class customer service

Test SingleMode & Multimode fiber optic cable systems.

Buying, Selling, Trading Wavetek IDEAL LT8600

LT8000 FIBERKITS

  • Tests Multimode and Singlemode fiber for power loss
  • LED and laser light sources generate 850 nm and 1300 nm wavelengths on Multimode cable 1310 nm and 1550 nm on Singlemode cable
  • One power meter to test both Multimode and Singlemode

Features:

  • Automatically test multiple wavelengths without changing connectors or switching settings
  • LED and laser light sources generate 850nm wavelengths on Multimode cable
  • Label and organize test results by direction, drop, project and job. Upload stored fiber tests and create reports using LT Record Manager PC software
  • Supports multiple fiber optic connector configurations

If you’re selling your Wavetek IDEAL LT8600 please fill out form on the right hand side of page.

Selling Wavetek IDEAL LT8600 – We Buy New Used IDEAL LT8600 (‘s) Top Dollar Paid!

If you’re looking to Sell Wavetek IDEAL LT8600Wavetek IDEAL LT8600

Tests up to 300 MHz exceeding the requirement for emerging CAT 6/Class E standards
ETL Certified Level III Accuracy
Performs all advanced Power Sum measurements up to 300 MHz
Built in TDR capability
Options for Singlemode and Multimode fiber optic testing
LT-Record Manager software supports all record keeping, reporting and certification requirements
Supports emerging CAT 6/Class E standards and more!
LT 8600 ships with a soft carrying case
The LT 8600TSP and LT 8600T are 300 MHz Level III high-performance cable certifiers that exceed the requirements for emerging CAT 6/Class E testing standards.

Buying, Selling, Trading Wavetek IDEAL LT8600

The competitive nature of the cable installation market demands that you are prepared to complete testing activities for every type of network design. The LT 8600TSP and LT 8600T allow you to perform all required tests, including tests on emerging CAT 6/Class E standards, helping you keep pace with new business opportunities.

 

Tests up to 300 MHz exceeding the requirement for emerging CAT 6/Class E standards Vendor Specific adapters required for testing CAT 6 systems, see accessory page for listing of available adapters Performs all advanced Power Sum measurements up to 300 MHz Supports up to 15 different tests individually or in a test suite Built in TDR capability Options for Singlemode and Multimode fiber optic testing Talkset capability LT-Record Manager software supports all record keeping, reporting and certification requirements Easy-to-use button interface Backed by IDEAL’s world class customer service

 

Test SingleMode & Multimode fiber optic cable systems with Wavetek FiberKit Multimode Fiber Optic Adapters!

Tests Multimode and Singlemode fiber for power loss

LED and laser light sources generate 850 nm and 1300 nm wavelengths on Multimode cable 1310 nm and 1550 nm on Singlemode cable

One power meter to test both Multimode and Singlemode


(Single-mode fiber modules not included in this sale).
Features:
Automatically test multiple wavelengths without changing connectors or switching settings

LED and laser light sources generate 850nm wavelengths on Multimode cable

Label and organize test results by direction, drop, project and job. Upload stored fiber tests and create reports using LT Record Manager PC software

Supports multiple fiber optic connector configurations

If you’re selling your Wavetek IDEAL LT8600 please fill out form on the right hand side of page.