If you’re looking to Sell Fluke Microtest OMNIScanner 2 OMNIFiber Cat6 SM MM
Advanced Certification for Premium Network Testing New cables. New standards. New challenges. That’s the world of network testing today. As for tomorrow, the only certainty is even more rapid growth. Fluke Networks helps you keep the pace in this ever-evolving industry with innovative Network SuperVision Solutions™ for certifying high-performance cabling systems. The OMNIScanner2 provides a dvanced certification for Cat 5/5e/6/7 cabling links to 300 MHz using an extendable digital platform that ensures unprecedented Level III accuracy. With fast Autotest times, powerful diagnostics, intuitive gra phical interface and customizable solutions to support a wide range of testing needs, look no further than the OMNIScanner2.
Buying, Selling, Trading Fluke Microtest OMNIScanner 2
Features
- Certifies Category 5, 5e, 6 and 7 cabling up to 300 MHz
- Comp lies completely with the latest TIA/ISO/IEC standards
- Instantly pinpoints specific connection failures with S-Bands™ diagnostics
- Features a dynamic range of 100 dB to accurately measure the fain test signals
- Has manufacturer-specific cable libraries pre-installed
- 32MB MultiMediaCard flash stores 400 graphical full color Cat 6 link test results
- Supports lightning-fast download times throu gh a USB port
- Tests for Long Reach Ethernet
- Stores full graphical data for all measurements
Speed your testing cycle From beginning to end of the network testing process, OMNIScanner2 acceler ates your work, simplifies your tasks and delivers higher productivity to your bottom line.
Easy set-up The vendor-specific cable libraries in OMNIScanner2 make setting up and executing your test operat ions easy. Regardless of the type of cable you are certifying, OMNIScanner2 speeds through the required test with ease.
Easy on-site use Simple, intuitive controls and commands make training your techn icians easy. They will appreciate the clear display, the tough protective casing and the new long-lasting NiMH batteries. MultiMediaCard flash storage, stores up to 10,000 tests and will keep your team working without interruptions.
Pinpoint accuracy You, your customer and your cable manufacturer will all be reassured by the laboratory standard accuracy of the OMNIScanner2 five times more precise than the pr oposed Level 3 standards. Fluke Network’s patentpending S-Bands™ diagnostics can save hours of confusion about network problems by instantly identifying (or eliminating) specific connection failures.
Faster uploads OMNIScanner2 is enabled for high-speed USB connection to your computer. With our free software, you will be able to transfer test results at breakneck speed to your PC.
Colo r graphic reports The PASS report is the end-product your customer or management is looking for. This professional color graphic report that tells the whole test story at a glance. You can even ins ert your logo so that your good workmanship carries your own name.
Fiber is a snap The OMNIScanner2 is more than the industry’s leading copper cable tester ‘ it’s the premier fiber tester, to o. Just snap on one of the handy adapters (sold separately) and you’re holding the powerful OMNIFiber. The one-button Autotest for the OMNIFiber MM and SM units measures length, loss and propagation d elay. They provide simultaneous measurements on both transmit and receive fibers. With the OMNIFiber you can conduct bi-directional measurement without exchanging units, saving time out in the field.< BR>The OMNIScanner2’s ability to test fiber, copper and coaxial networks means higher productivity, lower cost and greater profitability.
Reporting Linkware™ Software makes it easy to manage and print rich test data, to ensure the quality of the installation and performance. Instantly access and organize your results and create professional reports that meet new certification dema nds, impress your customers and give yourself a competitive edge. Merge results for the entire network with the OptiFiber Certifying OTDR or the DSP Series cable tester.
Certify multimode a nd singlemode fiber with Fluke Networks OMNIFiber Adapters.
All of Fluke Networks OMNIFiber Adapters:
- Test two fibers at two wavelengths in a single automated operation.
- Measure fibe r length, propagation delay and optical loss.
- Provide clear PASS or FAIL indication with automated results analysis.
- Enable bi-directional testing without swapping main and remote units.
- Feature standards and fiber cable libraries for easy set-up.
- Incorporate interchangeable connector adapters for simple network connection.
- Communicate with LinkWare™ Cable Test Man agement Software.
- Quickly snap onto any OMNIScanner® series cable analyzer.
- Are ruggedly built for demanding field use.
- Test multimode fiber at 850 nm and 1300 nm with the LED-base d OMNIFiber® MM.
- Test singlemode fiber at 1310 nm and 1550 nm with the laser-based OMNIFiber® SM.
The right adapter for the job Your network may contain different fiber types: multimode or singlemode. The way to accurately test and certify your network is with an adapter designed for the job. Fluke Networks offers two OMNIFiber adapters. Use the OMNIFiber MM adapter for multimode fiber. Its LED sources ensure accurate, standards-compliant results when testing multimode fiber. Use the OMNIFiber SM adapter for singlemode fiber. Its laser sources ensure accurate, standards-compliant results when testing singlemode fiber.
Fast and easy testing Using an OMNIFiber adapter, OMNIScanner provides a one-button •Autotest• that measures fiber length and op tical loss on two fibers at two wavelengths in a single automated operation. The scanner then compares the results to the industry standard you select and instantly provides a clear PASS or FAIL i ndication. Test more fibers in less time with OMNIFiber. OMNIFiber adapters connect easily to the network. Interchangeable connector adapters permit simple network connection and straightforward reference power measurement. Interchangeable connector adapters are available in the most popular connector styles.
Reporting made simple LinkWare™ Software makes it easy to manage and print the rich test data, to ensure the quality of the installation and performance. Instantly access and organize your results and create professional reports that meet new certification de mands, impress your customers and give yourself a competitive edge. Merge results for the entire network with the OptiFiber Certifying OTDR or the DSP Series cable tester.