If you’re looking to Sell Fluke Microtest OMNIFiber MM Fiber Module Set

OMNIFiber snaps onto the top of OMNIScanner 2, Omniscanner 1 & Omnscanner LT copper cable tester to transform it into a Multi-mode fiber certification tool. Using the OMNIFiber adapter, OMNIScanner provides a one-button “Autotest” that measures multimode length, loss and propagation delay on both transmit and receive fibers at 850 and 1300 nm simultaneously. It then compares the results to the appropriate industry standard and provides a simple PASS/FAIL indication of the tested link.

Buying, Selling, Trading Fluke Microtest OMNIFiber

• Dual-fiber, dual wavelength, multimode certification with OMNIFiber Adapters
• Easily manage and document copper and fiber links with LinkWare software

Test Functions:

• Multimode Fiber: Length, Propagation Delay, Loss (850nm & 1300nm)

If you’re selling your Fluke Microtest OMNIFiber please fill out form on the right hand side of page.

If you’re looking to Sell Fluke Networks OMNIScanner 2 Omnifiber SM MM

Fluke Networks OMNIScanner 2 Digital Cable Analyzer & SM/MM OMNIFiber Modules :

FEATURES :

The OMNIScanner 2 provides advanced certification for Cat 5/5e/6 cabling links to 300 MHz using an extendible digital platform that ensures unprecedented Level III accuracy. With superior diagnostics, Cat 6 Permanent Link and Channel support standard, and comprehensive test results management software, you can rely on the OMNIScanner 2 to help you win any Cat 6/5e bid.

SPECIFICATIONS :

* Instantly pinpoint specific connection failures with S-Bands diagnostics.
* Test up to 300 MHz on class F links.
* Shielded plug to test Cat 6 compliance and interoperability.
* Dual-fiber, dual wavelength, multimode  certification with OMNIFiber Modules.
* USB connections for high- speed downloads.
* Manufacturer-specific cable libraries pre-installed.
* Easily manage and document copper and fiber links with new LinkWare software.

OMNIFiber Adapters :

OMNIFiber Adapters snap onto the top of a OMNIScanner 2, OMNIScanner 1 or OMNIScanner LT copper cable tester to transform it into a Multi-mode fiber certification tool. Using the OMNIFiber Adapter, OMNIScanner provides a one-button “Autotest” that measures multimode length, loss and propagation delay on both transmit and receive fibers at 850 and 1300 nm simultaneously. It then compares the results to the appropriate industry standard and provides a simple PASS/FAIL indication of the tested link.

Dual-fiber, dual wavelength, multimode certification with OMNIFiber Adapters.
Easily manage and document copper and fiber links with LinkWare software.

TEST FUNCTIONS :
Singlemode Fiber : Length, Propagation Delay, Loss (1310nm & 1550nm).
Multimode Fiber : Length, Propagation Delay, Loss (850nm & 1300nm).

If you’re selling your Fluke Networks OMNIScanner 2 please fill out form on the right hand side of page.

Fluke Networks OMNIScanner 2 Digital Cable Analyzer & SM/MM OMNIFiber Modules :FEATURES :The OMNIScanner 2 provides advanced certification for Cat 5/5e/6 cabling links to 300 MHz using an extendible digital platform that ensures unprecedented Level III accuracy. With superior diagnostics, Cat 6 Permanent Link and Channel support standard, and comprehensive test results management software, you can rely on the OMNIScanner 2 to help you win any Cat 6/5e bid.Buying, Selling, Trading Fluke Networks OMNIScanner 2SPECIFICATIONS :* Instantly pinpoint specific connection failures with S-Bands diagnostics.
* Test up to 300 MHz on class F links.
* Shielded plug to test Cat 6 compliance and interoperability.
* Dual-fiber, dual wavelength, multimode  certification with OMNIFiber Modules.
* USB connections for high- speed downloads.
* Manufacturer-specific cable libraries pre-installed.
* Easily manage and document copper and fiber links with new LinkWare software.

OMNIFiber Adapters :OMNIFiber Adapters snap onto the top of a OMNIScanner 2, OMNIScanner 1 or OMNIScanner LT copper cable tester to transform it into a Multi-mode fiber certification tool. Using the OMNIFiber Adapter, OMNIScanner provides a one-button “Autotest” that measures multimode length, loss and propagation delay on both transmit and receive fibers at 850 and 1300 nm simultaneously. It then compares the results to the appropriate industry standard and provides a simple PASS/FAIL indication of the tested link.Dual-fiber, dual wavelength, multimode certification with OMNIFiber Adapters.
Easily manage and document copper and fiber links with LinkWare software.

TEST FUNCTIONS :
Singlemode Fiber : Length, Propagation Delay, Loss (1310nm & 1550nm).
Multimode Fiber : Length, Propagation Delay, Loss (850nm & 1300nm).

If you’re selling your Fluke Networks OMNIScanner 2 please fill out form on the right hand side of page.

If you’re looking to Sell Fluke Networks OMNIScanner 2 Omnifiber Multimode

Fluke Networks OMNIScanner 2 Digital Cable Analyzer & MM OMNIFiber Modules :

FEATURES :

The OMNIScanner 2 provides advanced certification for Cat 5/5e/6 cabling links to 300 MHz using an extendible digital platform that ensures unprecedented Level III accuracy. With superior diagnostics, Cat 6 Permanent Link and Channel support standard, and comprehensive test results management software, you can rely on the OMNIScanner 2 to help you win any Cat 6/5e bid.

SPECIFICATIONS :

* Instantly pinpoint specific connection failures with S-Bands diagnostics.
* Test up to 300 MHz on class F links.
* Shielded plug to test Cat 6 compliance and interoperability.
* Dual-fiber, dual wavelength, multimode  certification with OMNIFiber Modules.
* USB connections for high- speed downloads.
* Manufacturer-specific cable libraries pre-installed.
* Easily manage and document copper and fiber links with new LinkWare software.

Buying, Selling, Trading Fluke Networks OMNIScanner 2

OMNIFiber Multimode Adapters :

OMNIFiber Adapters snap onto the top of a OMNIScanner 2, OMNIScanner 1 or OMNIScanner LT copper cable tester to transform it into a Multi-mode fiber certification tool. Using the OMNIFiber Adapter, OMNIScanner provides a one-button “Autotest” that measures multimode length, loss and propagation delay on both transmit and receive fibers at 850 and 1300 nm simultaneously. It then compares the results to the appropriate industry standard and provides a simple PASS/FAIL indication of the tested link.

Dual-fiber, dual wavelength, multimode certification with OMNIFiber Adapters.
Easily manage and document copper and fiber links with LinkWare software.

TEST FUNCTIONS :
Multimode Fiber : Length, Propagation Delay, Loss (850nm & 1300nm).

If you’re selling your Fluke Networks OMNIScanner 2 please fill out form on the right hand side of page.

If you’re looking to Sell Fluke Microtest OMNIScanner 2 OMNIFiber Cat6 SM MM

Advanced Certification for Premium Network Testing New cables. New standards. New challenges. That’s the world of network testing today. As for tomorrow, the only certainty is even more rapid growth. Fluke Networks helps you keep the pace in this ever-evolving industry with innovative Network SuperVision Solutions™ for certifying high-performance cabling systems. The OMNIScanner2 provides a dvanced certification for Cat 5/5e/6/7 cabling links to 300 MHz using an extendable digital platform that ensures unprecedented Level III accuracy. With fast Autotest times, powerful diagnostics, intuitive gra phical interface and customizable solutions to support a wide range of testing needs, look no further than the OMNIScanner2.

Buying, Selling, Trading Fluke Microtest OMNIScanner 2

Features

• Certifies Category 5, 5e, 6 and 7 cabling up to 300 MHz
• Comp lies completely with the latest TIA/ISO/IEC standards
• Instantly pinpoints specific connection failures with S-Bands™ diagnostics
• Features a dynamic range of 100 dB to accurately measure the fain test signals
• Has manufacturer-specific cable libraries pre-installed
• 32MB MultiMediaCard flash stores 400 graphical full color Cat 6 link test results
• Supports lightning-fast download times throu gh a USB port
• Tests for Long Reach Ethernet
• Stores full graphical data for all measurements

Speed your testing cycle From beginning to end of the network testing process, OMNIScanner2 acceler ates your work, simplifies your tasks and delivers higher productivity to your bottom line.

Easy set-up The vendor-specific cable libraries in OMNIScanner2 make setting up and executing your test operat ions easy. Regardless of the type of cable you are certifying, OMNIScanner2 speeds through the required test with ease.

Easy on-site use Simple, intuitive controls and commands make training your techn icians easy. They will appreciate the clear display, the tough protective casing and the new long-lasting NiMH batteries. MultiMediaCard flash storage, stores up to 10,000 tests and will keep your team working without interruptions.

Pinpoint accuracy You, your customer and your cable manufacturer will all be reassured by the laboratory standard accuracy of the OMNIScanner2 five times more precise than the pr oposed Level 3 standards. Fluke Network’s patentpending S-Bands™ diagnostics can save hours of confusion about network problems by instantly identifying (or eliminating) specific connection failures.

Faster uploads OMNIScanner2 is enabled for high-speed USB connection to your computer. With our free software, you will be able to transfer test results at breakneck speed to your PC.

Colo r graphic reports The PASS report is the end-product your customer or management is looking for. This professional color graphic report that tells the whole test story at a glance. You can even ins ert your logo so that your good workmanship carries your own name.

Fiber is a snap The OMNIScanner2 is more than the industry’s leading copper cable tester ‘ it’s the premier fiber tester, to o. Just snap on one of the handy adapters (sold separately) and you’re holding the powerful OMNIFiber. The one-button Autotest for the OMNIFiber MM and SM units measures length, loss and propagation d elay. They provide simultaneous measurements on both transmit and receive fibers. With the OMNIFiber you can conduct bi-directional measurement without exchanging units, saving time out in the field.< BR>The OMNIScanner2’s ability to test fiber, copper and coaxial networks means higher productivity, lower cost and greater profitability.

Reporting Linkware™ Software makes it easy to manage and print rich test data, to ensure the quality of the installation and performance. Instantly access and organize your results and create professional reports that meet new certification dema nds, impress your customers and give yourself a competitive edge. Merge results for the entire network with the OptiFiber Certifying OTDR or the DSP Series cable tester.

Certify multimode a nd singlemode fiber with Fluke Networks OMNIFiber Adapters.

All of Fluke Networks OMNIFiber Adapters:

• Test two fibers at two wavelengths in a single automated operation.
• Measure fibe r length, propagation delay and optical loss.
• Provide clear PASS or FAIL indication with automated results analysis.
• Enable bi-directional testing without swapping main and remote units.
• Feature standards and fiber cable libraries for easy set-up.
• Incorporate interchangeable connector adapters for simple network connection.
• Communicate with LinkWare™ Cable Test Man agement Software.
• Quickly snap onto any OMNIScanner® series cable analyzer.
• Are ruggedly built for demanding field use.
• Test multimode fiber at 850 nm and 1300 nm with the LED-base d OMNIFiber® MM.
• Test singlemode fiber at 1310 nm and 1550 nm with the laser-based OMNIFiber® SM.

The right adapter for the job Your network may contain different fiber types: multimode or singlemode. The way to accurately test and certify your network is with an adapter designed for the job. Fluke Networks offers two OMNIFiber adapters. Use the OMNIFiber MM adapter for multimode fiber. Its LED sources ensure accurate, standards-compliant results when testing multimode fiber. Use the OMNIFiber SM adapter for singlemode fiber. Its laser sources ensure accurate, standards-compliant results when testing singlemode fiber.

Fast and easy testing Using an OMNIFiber adapter, OMNIScanner provides a one-button •Autotest• that measures fiber length and op tical loss on two fibers at two wavelengths in a single automated operation. The scanner then compares the results to the industry standard you select and instantly provides a clear PASS or FAIL i ndication. Test more fibers in less time with OMNIFiber. OMNIFiber adapters connect easily to the network. Interchangeable connector adapters permit simple network connection and straightforward reference power measurement. Interchangeable connector adapters are available in the most popular connector styles.

Reporting made simple LinkWare™ Software makes it easy to manage and print the rich test data, to ensure the quality of the installation and performance. Instantly access and organize your results and create professional reports that meet new certification de mands, impress your customers and give yourself a competitive edge. Merge results for the entire network with the OptiFiber Certifying OTDR or the DSP Series cable tester.

If you’re selling your Fluke Microtest OMNIScanner 2 please fill out form on the right hand side of page.

If you’re looking to Sell Fluke Microtest OMNIScanner 2 Omnifiber Multimode

The OMNIScanner2 provides advanced certification for Cat 5/5e/6 cabling links to 300 MHz using an extendible digital platform that ensures unprecedented Level III accuracy. With superior diagnostics, Cat 6 Permanent Link and Channel support standard, and comprehensive test results management software, you can rely on the OMNIScanner2 to help you win any Cat 6/5e bid.

Features

• Instantly pinpoint specific connection failures with S-Bands diagnostics
• Test up to 300 MHz on class F links
• Shielded plug to test Cat 6 compliance and interoperability
• Dual-fiber, dual wavelength, multimode & single-mode certification with OMNIFiber Modules
• USB connections for high- speed downloads
• Manufacturer-specific cable libraries pre-installed
• Easily manage and document copper and fiber links with new LinkWare software

Buying, Selling, Trading Fluke Microtest OMNIScanner 2

Omnifiber Adapters:

OMNIFiber snaps onto the top of OMNIScanner 2, Omniscanner 1 & Omnscanner LT copper cable tester to transform it into a Multi-mode fiber certification tool. Using the OMNIFiber adapter, OMNIScanner provides a one-button “Autotest” that measures multimode length, loss and propagation delay on both transmit and receive fibers at 850 and 1300 nm simultaneously. It then compares the results to the appropriate industry standard and provides a simple PASS/FAIL indication of the tested link.

• Dual-fiber, dual wavelength, multimode certification with OMNIFiber Adapters
• Easily manage and document copper and fiber links with LinkWare software

Test Functions:

• Multimode Fiber: Length, Propagation Delay, Loss (850nm & 1300nm)

If you’re selling your Fluke Microtest OMNIScanner 2 please fill out form on the right hand side of page.

If you’re looking to Sell Fluke Networks OMNIScanner LT SM & MM Set

Powerful cable certification
solution for every budget The OMNIScanner® LT meets your technology needs and your budget requirements for testing, certifying and documenting copper and fiber networks. That’s because the LT version has the same digital technology as the OMNIScanner2, but without some of the “extras,” making it the most affordable solution you can find.

The OMNIScanner LT provides advanced certification for Cat 5/5e/6 cabling links to 300 MHz delivering unprecedented Level III accuracy. Its superior diagnostics precisely pinpoint faults, while identifying specific connection failures, saving you hours of wasted troubleshooting time. You can test cable compliance with the current TIA/ISO/IEC cabling standards and add powerful adapters like the OMNI-LIA101S Permanent Link Adapter or OMNIFiber MM or SM Adapters for superior test capability.

The OMNIScanner LT features:

– Certification for Cat5/5e/6 cabling links
– Support up to 300MHz bandwidth for testing Category 6/Class E links
– S-Bands diagnostics for precise fault location
– Intuitive graphical interface for maximum technician productivity
– Pre-installed manufacturer-specific cable libraries
– Compliance with TIA/ISO/IEC cabling standards
– The ability to easily manage and document copper and fiber links with new LinkWare™ Software

From beginning to end of the network testing process, OMNIScanner LT accelerates your work, simplifies your tasks and delivers higher productivity to your bottom line.

Speed your testing cycle
From beginning to end of the network testing process, OMNIScanner LT accelerates your work, simplifies your tasks and delivers higher productivity to your bottom line.

Easy set-up
The vendor-specific cable libraries in OMNIScanner LT make setting up and executing your test operations easy. Regardless of the type of cable you are certifying, OMNIScanner LT speeds through the required test with ease.

Digital test technology
Built on a digital platform, the OMNIScanner LT ensures compliance with new standards as they are approved. So when you purchase an OMNIScanner LT, you know that your investment is future-ready. The OMNIScanner LT processes the measurement results with Digital Signal Processing technology. This measurement method has proven to exceed all other methods for accuracy and repeatability. What does this mean for you? You’ll get the same answer every time. The OMNIScanner LT rivals the accuracy of laboratory test equipment.

Pinpoint accuracy
You, your customer and your cable manufacturer will all be reassured by the laboratory standard accuracy of the OMNIScanner LT – five times more precise than the Level III standards. Fluke Networks’ patent pending S-Bands™ diagnostics can save hours of confusion about network problems by instantly identifying (or eliminating) specific connection failures.

Buying, Selling, Trading Fluke Networks OMNIScanner LT

Fiber is a snap
Transforms the OMNIScanner LT into a powerful fiber optic tool for testing and certifying multimode and singlemode premise fiber networks. The one-button Autotest and simultaneous dual-wavelength measurement of two fibers is the most productive and reliable method for testing fiber links. Choose from two adapters: the LED-based OMNIFiber MM adapter is perfect for multimode fiber networks, while the laser-based OMNIFiber SM adapter certifies singlemode fiber.

Includes:

– Fluke Networks OMNIScanner LT Main
– Fluke Networks OMNIScanner LT Remote
– Fluke Networks OMNIFiber Multimode 850nm/1300nm Module Set
– Microtest OMNIFiber Singlemode 1310nm/1550nm Module Set
– (2) Fluke Networks OMNIScanner Universal Permanent Link Adapters
– Fluke P/N: 2950-4015-02 Set Reference Adapter
– Fiber Cables:
– – (2) MM ST-ST
– – (2) SM ST-SC
– SC-SC Fiber Connector
– Fluke Linkware Cable Management Software
– (2) Battery Packs
– (2) AC Adapters/Chargers
– (2) Power Cords
– Set of PM06s
– RS-232 PC Interface Cable
– User Manual On CD-ROM
– Soft Carrying Case

If you’re selling your Fluke Networks OMNIScanner LT please fill out form on the right hand side of page.

If you’re looking to Sell Fluke Networks OMNIScanner LT Multimode Set

Powerful cable certification solution for every budget The OMNIScanner® LT meets your technology needs and your budget requirements for testing, certifying and documenting copper and fiber networks. That’s because the LT version has the same digital technology as the OMNIScanner2, but without some of the “extras,” making it the most affordable solution you can find.

The OMNIScanner LT provides advanced certification for Cat 5/5e/6 cabling links to 300 MHz delivering unprecedented Level III accuracy. Its superior diagnostics precisely pinpoint faults, while identifying specific connection failures, saving you hours of wasted troubleshooting time. You can test cable compliance with the current TIA/ISO/IEC cabling standards and add powerful adapters like the OMNI-LIA101S Permanent Link Adapter or OMNIFiber MM or SM Adapters for superior test capability.

Buying, Selling, Trading Fluke Networks OMNIScanner LT

The OMNIScanner LT features:

– Certification for Cat5/5e/6 cabling links
– Support up to 300MHz bandwidth for testing Category 6/Class E links
– S-Bands diagnostics for precise fault location
– Intuitive graphical interface for maximum technician productivity
– Pre-installed manufacturer-specific cable libraries
– Compliance with TIA/ISO/IEC cabling standards
– The ability to easily manage and document copper and fiber links with new LinkWare™ Software

From beginning to end of the network testing process, OMNIScanner LT accelerates your work, simplifies your tasks and delivers higher productivity to your bottom line.

Speed your testing cycle From beginning to end of the network testing process, OMNIScanner LT accelerates your work, simplifies your tasks and delivers higher productivity to your bottom line.

Easy set-up The vendor-specific cable libraries in OMNIScanner LT make setting up and executing your test operations easy. Regardless of the type of cable you are certifying, OMNIScanner LT speeds through the required test with ease.

Digital test technology Built on a digital platform, the OMNIScanner LT ensures compliance with new standards as they are approved. So when you purchase an OMNIScanner LT, you know that your investment is future-ready. The OMNIScanner LT processes the measurement results with Digital Signal Processing technology. This measurement method has proven to exceed all other methods for accuracy and repeatability. What does this mean for you? You’ll get the same answer every time. The OMNIScanner LT rivals the accuracy of laboratory test equipment.

Pinpoint accuracy You, your customer and your cable manufacturer will all be reassured by the laboratory standard accuracy of the OMNIScanner LT – five times more precise than the Level III standards. Fluke Networks’ patent pending S-Bands™ diagnostics can save hours of confusion about network problems by instantly identifying (or eliminating) specific connection failures.

Fiber is a snap Transforms the OMNIScanner LT into a powerful fiber optic tool for testing and certifying multimode and singlemode premise fiber networks. The one-button Autotest and simultaneous dual-wavelength measurement of two fibers is the most productive and reliable method for testing fiber links. Choose from two adapters: the LED-based OMNIFiber MM adapter is perfect for multimode fiber networks, while the laser-based OMNIFiber SM adapter certifies singlemode fiber.

Includes:

– Fluke Networks OMNIScanner LT Main
– Fluke Networks OMNIScanner LT Remote
– Fluke Networks OMNIFiber Multimode 850nm/1300nm Module Set
– (2) Fluke Networks OMNIScanner Universal Permanent Link Adapters
– Fluke P/N: 2950-4015-02 Set Reference Adapter
– (2) MM ST-ST Fiber Cables
– Fluke Linkware Cable Management Software
– (2) Battery Packs
– (2) AC Adapters/Chargers
– (2) Power Cords
– Set of PM06s
– RS-232 PC Interface Cable
– User Manual On CD-ROM
– Soft Carrying Case

If you’re selling your Fluke Networks OMNIScanner LT please fill out form on the right hand side of page.

If you’re looking to Sell Fluke OMNIFiber Cat6 Microtest OMNIScanner SM MM

The OMNIScanner provides advanced certification for Cat 5/5e/6 cabling links to 300 MHz using an extendible digital platform that ensures unprecedented Level III accuracy. You can rely on the OMNIScanner to help you win any Fiber Optic Cat 6/5e/5 bids.

OMNISCANNER is the most advanced hand-held certification and diagnostic tool for the verification of copper links. The Category 7, 6, 5E (Enhanced), 5 and ISO Class F, E, D, and C tester has an extended frequency range of 300 MHz. OMNISCANNER provides full software compliance with TIA and ISO/IEC requirements for measurement reporting and analysis (including Length, Delay, ACR, NEXT, ELFEXT, Return Loss, Resistance, PSNEXT, PSACR, PSELFEXT and Attenuation). In addition, OMNISCANNER measures Length, Delay, Impedance, and Resistance on coaxial cabling.

OMNISCANNER’s graphical user interface consists of a backlit LCD display, quick access menus, arrow keys, and descriptive menu options that guide you through certifying or troubleshooting cabling systems. For test and certification of twisted pair cabling, the OMNISCANNER requires the OMNIREMOTE unit at the opposite end of the cabling link under test. OMNISCANNER communicates with OMNIREMOTE to obtain status and perform measurements from both ends of the link.

Features:

• Instantly pinpoint specific connection failures with S-Bands diagnostics
• Test up to 300 MHz on class F links
• Dual-fiber, dual wavelength, Multimode & Single Mode certification with OMNIFiber Adapters
• Manufacturer-specific cable libraries pre-installed
• Easily manage and document copper and fiber links with new LinkWare software

Buying, Selling, Trading Fluke OMNIFiber Cat6

Certify multimode and singlemode fiber with Fluke Networks OMNIFiber Adapters.

All of Fluke Networks OMNIFiber Adapters:

• Test two fibers at two wavelengths in a single automated operation.
• Measure fibe r length, propagation delay and optical loss.
• Provide clear PASS or FAIL indication with automated results analysis.
• Enable bi-directional testing without swapping main and remote units.
• Feature standards and fiber cable libraries for easy set-up.
• Incorporate interchangeable connector adapters for simple network connection.
• Communicate with LinkWare™ Cable Test Man agement Software.
• Quickly snap onto any OMNIScanner® series cable analyzer.
• Are ruggedly built for demanding field use.
• Test multimode fiber at 850 nm and 1300 nm with the LED-base d OMNIFiber® MM.
• Test singlemode fiber at 1310 nm and 1550 nm with the laser-based OMNIFiber® SM.

The right adapter for the job
Your network may contain different fiber types: multimode or singlemode. The way to
accurately test and certify your network is with an adapter designed for the job. Fluke
Networks offers two OMNIFiber adapters. Use the OMNIFiber MM adapter for multimode fiber. Its LED sources ensure accurate, standards-compliant results when testing multimode fiber. Use the OMNIFiber SM adapter for singlemode fiber. Its laser sources ensure accurate, standards-compliant results when testing singlemode fiber.

Fast and easy testing
Using an OMNIFiber adapter, OMNIScanner provides a one-button •Autotest• that measures fiber length and op tical loss on two fibers at two wavelengths in a single automated operation. The scanner then compares the results to the industry standard you select and instantly provides a clear PASS or FAIL i ndication. Test more fibers in less time with OMNIFiber.
OMNIFiber adapters connect easily to the network. Interchangeable connector adapters permit simple network connection and straightforward reference power measurement. Interchangeable connector adapters are available in the most popular connector styles.

Reporting made simple
LinkWare™ Software makes it easy to manage and print the rich test data, to ensure the quality of the installation and performance. Instantly access and organize your results and create professional reports that meet new certification de mands, impress your customers and give yourself a competitive edge. Merge results for the entire network with the OptiFiber Certifying OTDR or the DSP Series cable tester.

If you’re selling your Fluke OMNIFiber Cat6 please fill out form on the right hand side of page.

If you’re looking to Sell Fluke OMNIFiber 850 Microtest OMNIScanner 1300 MM

The OMNIScanner provides advanced certification for Cat 5/5e/6 cabling links to 300 MHz using an extendible digital platform that ensures unprecedented Level III accuracy. You can rely on the OMNIScanner to help you win any Fiber Optic Cat 6/5e/5 bids.

OMNISCANNER is the most advanced hand-held certification and diagnostic tool for the verification of copper links. The Category 7, 6, 5E (Enhanced), 5 and ISO Class F, E, D, and C tester has an extended frequency range of 300 MHz. OMNISCANNER provides full software compliance with TIA and ISO/IEC requirements for measurement reporting and analysis (including Length, Delay, ACR, NEXT, ELFEXT, Return Loss, Resistance, PSNEXT, PSACR, PSELFEXT and Attenuation). In addition, OMNISCANNER measures Length, Delay, Impedance, and Resistance on coaxial cabling.

OMNISCANNER’s graphical user interface consists of a backlit LCD display, quick access menus, arrow keys, and descriptive menu options that guide you through certifying or troubleshooting cabling systems. For test and certification of twisted pair cabling, the OMNISCANNER requires the OMNIREMOTE unit at the opposite end of the cabling link under test. OMNISCANNER communicates with OMNIREMOTE to obtain status and perform measurements from both ends of the link.

Buying, Selling, Trading Fluke OMNIFiber 850

Features:

• Instantly pinpoint specific connection failures with S-Bands diagnostics
• Test up to 300 MHz on class F links
• Dual-fiber, dual wavelength, Multimode & Single Mode certification with OMNIFiber Adapters
• Manufacturer-specific cable libraries pre-installed
• Easily manage and document copper and fiber links with new LinkWare software

OMNIFiber Multimode Adapter Set

OMNIFiber is the first fiber adapter capable of supporting measurements for both single-and multimode fiber. OMNIFiber snaps onto the top of OMNIScanner 2, Omniscanner 1 & Omnscanner LT copper cable tester to transform it into a Multi-mode fiber certification tool. Using the OMNIFiber adapter, OMNIScanner provides a one-button “Autotest” that measures multimode length, loss and propagation delay on both transmit and receive fibers at 850 and 1300 nm simultaneously. It then compares the results to the appropriate industry standard and provides a simple PASS/FAIL indication of the tested link. With single mode fiber, OMNIScanner measures loss on transmit and receive fibers at 1310 nm.

• Dual-fiber, dual wavelength, multimode certification with OMNIFiber Adapters
• Easily manage and document copper and fiber links with LinkWare software

If you’re selling your Fluke OMNIFiber 850 please fill out form on the right hand side of page.

If you’re looking to Sell Fluke DTX-SFM Singlemode Fiber Modules NEW

Fluke Networks DTX-SFM

Fluke Networks DTX-SFM set of two DTX Fiber Modules adds record-fast singlemode fiber certification and fault location to the DTX CableAnalyzer™ Series. Only Fluke Networks’ DTX platform offers optional on-board fiber modules so you’ll never lose time searching for your fiber adapter. Modules are easy to insert into the back of any DTX Series CableAnalyzer. With a resident fiber module on board, fiber certification is always ready when you are. No other solution lets you switch between copper and fiber with a touch of a button.

These modules deliver the greatest time and cost savings. They accelerate testing through exclusive technology and an easy-to-use interface. Press the Autotest button and you get standards-compliant certification automatically. Test two fibers each at two wavelengths, measure length and determine the pass or fail status — all in about 12 seconds. That’s five times faster than other adapters. These modules let you test more fibers in less time, cutting testing costs and freeing you up for other tasks. They can easily save more than 100 labor hours per year.

DTX-SFM fiber modules use laser sources to ensure standards-compliant certification of singlemode fiber. Speed testing with TALK, FINDFIBER, MONITOR, bi-directional and single fiber test features. Save, upload, manage and print comprehensive certification reports using LinkWare PC software.

These comprehensive Tier 1 certification solutions include loss, attenuation, length and polarity measurements. You can validate fiber link performance and installation quality. Measure optical loss at multiple wavelengths. And bi-directionally test fibers at two wavelengths without swapping near- and far-end units. Deliver Tier 1 fiber certification reports by uploading test results to LinkWare PC software.

Buying, Selling, Trading Fluke DTX-SFM

An integrated on-module visual fault locator (VFL) makes troubleshooting simple link problems quick and incredibly easy. The bright laser-driven VFL helps you locate many near-end fiber faults. Also use it to locate fibers as well as verify continuity and polarity. Exclusive integrated design ensures the visual fault locator is always on hand when you need it.

Both modules incorporate 1310-nm and 1550-nm laser sources combined into a single output port, 850/1300/1310/1550-nm power meter and integrated VFL.

If you’re selling your Fluke DTX-SFM please fill out form on the right hand side of page.